How should the elevator be maintained? When carrying out elevator maintenance, we should not only perform monthly maintenance, but also conduct year-end maintenance. The inspection positions for year-end maintenance and monthly maintenance are different, and we need to take into account both when carrying out maintenance.
The elevator is small in size light in weight, making it particularly suitable for repairing electrical equipment in hotels, commercial buildings, airports, subways, stations, cultural and sports institutions,MaydayAutomobile hydraulic lifting platform, and scientific research institutions. It is clean and hygienic.
Mayday.Attention: When replacing the adjusting steel wire rope, the half round head bolt should be unscrewed first to allow the moving nut to roll together with the force bolt, so as not to move the nut up and down too much and damage other components. After the replacement of the safety wire rope on the elevator platform, adjust the position of the collision rod from the beginning to reach the super high limit position. The limit switch of the landing elevator platform should be regularly inspected and replaced or repaired in case of damage.
Variable speed motors extend the lifespan of batteries and motors, as they only consume the necessary energy for operation.
.Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
Blow out the plunger with compressed air, then install it and reinstall it.
Double masted lifting platform: The new generation product of the design is made of high-strength aluminum profiles. Due to the high strength of the profiles the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability,MaydayVehicle mounted hydraulic lifting platform, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted lifting platforms: three sets of masted support work platforms lift synchronously, and the support structure is the same as a single masted platform, with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
The elevator features and advantages of a smooth and repair free pivot, with built-in lanyard fixing points. An ergonomic joystick that can be operated from a platform or ground.
The use of elevators brings great convenience to production and can be used for normal production operations such as wood handling and container handling. In the process of using machinery, lifting machinery needs to undergo regular maintenance after a period of use, especially in harsh environmental conditions. Mechanical maintenance is an important task in maintaining mechanical operations, and regular maintenance needs to be carried out according to environmental differences.
The main lifting mast adopts high-strength profiles, which have high safety and light overall weight.
property right.The double protection leg structure ensures safer work and can be used for lifting and lowering operations close to the working face.
To reduce noise, increase the clearance inside the platform and also make the transmission more stable and the mechanism vibration less.
Single group high-strength mast elevator, with light weight and good maneuverability, suitable for single person operation.
Low noise allows operators to operate in a quiet working environment. The large angle steering system provides operational functions. The spin out battery box and power module can be accessed to the components.
Honest service.Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized,MaydayMobile lifting platform hydraulic, and counted to prevent the tools used for maintenance from being left inside the equipment especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.
Check the chain system: Before starting the machine, carefully check the operating condition of the chain system and adjust it if necessary to evenly tighten each chain. Lock it with a spare nut, and apply a small amount of No. 20 oil to each part of the chain; Standing on the ground, press the up and down buttons to check the mechanical operation, check if the chain is detached from the sprocket, and check if the sprocket support plate is loose. Check the oil tank: Before starting the machine, check if there is enough hydraulic oil in the tank. If there is insufficient hydraulic oil, it should be replenished in a timely manner. Check whether the action of the leakage protector and high breaking circuit breaker is sensitive. The working mode of the elevator operator on the platform: The operator should lift the railing or climb the ladder from the front to enter the guardrail, lock the guardrail in the correct position, stand in the center position, press the up button, stop at the desired position, and start working. When working at heights, do not shake or step on guardrails to avoid accidents. Press the descent button to descend. If there is a sudden power outage during work, the emergency manual lowering device can be activated to safely lower the elevator and return to its initial position. Long term manufacturer of mobile elevators, 20 year old brand, with price advantages and guaranteed quality!
Single mast elevator Standard configuration of single mast elevator: platform height specifications: optional 4m, 6m, 8m, 9m; Power supply: single-phase AC (AC220V/50HZ), the person in charge of the work should explain the technical and safety aspects to the operator. The website content should include: the content and requirements of the work website; Safety precautions and danger points; Personnel division of labor and scope of responsibility.
The hydraulic power unit adopts an integral pump station, intermediate shafts