Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.
Characteristics of elevator form:.
Yuanbao.Check for wear on rollers, intermediate shafts and bearings, oil cylinder pin shafts and bearings, boom hinge shafts and bearings, etc.
Summary: Elevators can be large or small, and regardless of size, there should be no sense of luck during operation. It is necessary to establish correct safety awareness in order to ensure safety.
.How to maintain the elevator when it is not in use? If the elevator is placed in the warehouse, its weight is borne by the four parts of the elevator. Over time, the tires of the elevator may deform due to excessive pressure. So when we are idle, we must open its four support legs to bear the weight of the elevator itself, in order to protect the rubber tires.
Hydraulic lifting platforms can be divided into: four wheel mobile, two wheel traction, car modification, car type, and lifting heights ranging from 4 meters to 18 meters. This series of products has a load capacity of 0.1 to 0.8 tons, and can also be customized according to user requirements, with a high load capacity of up to 10 tons.
It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas from the elevator engine contains carbon monoxide. This is a toxic gas that has been exposed to low concentrations of carbon monoxide for a long time. It can cause symptoms such as headache, shortness of breath, body weakness and dizziness psychological confusion,YuanbaoHydraulic scissor fork lifting table, and even brain damage. In severe cases, it can cause death, such as starting the engine of the equipment in the garage.
Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process, and at this position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the box. The hydraulic oil is darkened, sticky, or has foreign objects such as gravel. If found, service on-site settlement, and honest operation!
Semi automatic assisted walking lifting platform: It has more driving devices than traction lifting platform. If people cannot push it, they can use walking or lifting platform, without the need for external power supply, improving work efficiency.
Create brilliance.Strictly follow the operating instructions of the elevator for safe use and strictly prohibit illegal operations.
We are well aware of the harm of pressure, but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article, you may know that oil contains excessive water impurities which can rust the hydraulic components of the elevator, emulsify and deteriorate the oil, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance, it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate, and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!
Two sets of masts support the synchronous lifting of the working platform, and the elevator has stable operation; The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift; Can be equipped with gantry cross frames; Having the same convenient maneuverability as a single mast, the support structure is the same as a single mast platform; It has good load-bearing capacity and is suitable for no more than two people climbing at the same time.
Furthermore,YuanbaoSmall hydraulic elevator, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, it should be replaced with new hydraulic oil in a timely manner. Mechanical maintenance should also be done well, otherwise oxidation and deterioration may occur and cause damage to the elevator. Specializing in product and renewable resource business, including mobile elevator manufacturers
Price.Elevators have the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability, and are widely used in factories, hotels, restaurants, stations, airports theaters, exhibition halls, and other places. They are a good safety companion for maintenance, painting, decoration, replacement of lighting fixtures, electrical cleaning and maintenance, and other purposes. Adopting high-strength and high-quality specialized aluminum profiles, it has the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability.
Check the chain system: Before starting the machine, carefully check the operating condition of the chain system and adjust it if necessary to evenly tighten each chain. Lock it with a spare nut, and apply a small amount of No. 20 oil to each part of the chain; Standing on the ground, press the up and down buttons to check the mechanical operation, check if the chain is detached from the sprocket, and check if the sprocket support plate is loose. Check the oil tank: Before starting the machine, check if there is enough hydraulic oil in the tank. If there is insufficient hydraulic oil, it should be replenished in a timely manner. Check whether the action of the leakage protector and high breaking circuit breaker is sensitive. The working mode of the elevator operator on the platform: The operator should lift the railing or climb the ladder from the front to enter the guardrail, lock the guardrail in the correct position, press the up button, slowly raise the workbench, stop at the desired position, and start working. When working at heights, do not shake or step on guardrails to avoid accidents. Press the descent button to descend. If there is a sudden power outage during work, the emergency manual lowering device can be activated to safely lower the elevator and return to its initial position. Long term manufacturer of mobile elevators,YuanbaoHydraulic electric lifting platform, with price advantages and guaranteed quality!
A specially designed guide wheel device between masts ensures smooth and smooth lifting.
Yuanbao.Before the lift operation, the person in charge of the work should explain the technical and safety aspects to the operator. The website content should include: the content and requirements of the work website; Safety precautions and danger points; Personnel division of labor and scope of responsibility.
The vehicle body should be grounded according to regulations, and the lifting operation should be commanded by the person in charge of the work. The person in charge should follow the standard signal and communicate with the lift operator. The signal emitted must be clear and accurate.
The elevator has strong controllability, simple operation, and high accuracy, which can meet different needs of different heights, that is, press and stop, making high-altitude operations simple and feasible.