CologneScissor
CologneFoldingThe spacing between wall brackets and the height of guide rails above the high attachment point should comply with the requirements of the user manual.
Setting requirements: The landing door should be standardized and tooled.
Cologne.The impact load can cause early wear, fracture, as well as generate impact pressure in the hydraulic system,CologneFour meter electric elevator, which in turn can damage hydraulic components, oil seals, and high-pressure oil
The safety distance between the outer edge of the upper part of the landing door and the moving parts of the electric elevator during normal operation should not be less than 0.75m; If the rated speed is not greater than 0.7m/s,CologneElectric mobile elevator, the safety distance can be 0.40m.
.The landing door should be in a normally closed state. Without the permission of the construction electric elevator driver, the bearing capacity of its supporting structure should be checked.
Model Example: Hanging Cage Specification: LABSC200/200TD3200x1500 Type I: 2900~3600 Type II: 2900~3600 Type V: 1800~250044003800 Technical Requirements: The load-bearing capacity of the foundation should be greater than P: P=(hanging cage weight+outer cage weight+total weight of guide rail frame+counterweight+load) x0.02 (kN).
Drainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).
The magnetic directional valve returns to the fuel tank. To ensure stable landing of heavy objects and safe and reliable braking a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the landing speed does not change due to heavy objects. It is adjusted by the saving valve
Setting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.
build.The use of standard section connecting bolts should comply with the user manual and specification requirements.
When the wall bracket cannot meet the requirements of the construction site, it should be designed and calculated separately.
Every theater is a public place with a large number of people, and safety considerations should be taken into account in stage design. According to relevant national regulations, in order to prevent accidents caused by the crushing of electric elevators or improper control by drivers. Electric elevators should be equipped with the following necessary safety devices to ensure that the car of the electric elevator stops rising or falling in a timely manner.
The entrance of each landing platform must be equipped with a landing door, which must open towards the landing platform side, and the door bolt must be set on the side next to the construction electric elevator.
Variable cost.Setting requirements: The foundation and foundation of the construction electric elevator should meet the requirements of the user manual. Before installing the construction electric elevator, the foundation should be inspected and accepted according to the requirements of the specifications. Only after passing the inspection can the installation be carried out.
Try to use this equipment in areas with wind force less than level five, and avoid using it when the wind force is too strong to avoid accidents.
To ensure safe and reliable braking of the lifting platform and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure. Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; Program adjustment time delay to avoid frequent movement of electric elevators that may affect their service life.
Cologne.There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.
Use floor doors and cage door devices on construction sites where conditions permit.
Setting requirements: The installation and dismantling workers, electricians and other operators of construction electric elevators should have special construction operations.