HaHydraulic turnover machineProduct desciption-World information network

Elevator does not close the door or repeatedly opens and closes the door: there are debris blocking the light curtain or door contact plate at the entrance or sill.

The gantry elevator is used in the door legs of large gantry cranes to transport workers and maintenance components inside the gantry crane

Ha.The safety monitoring machine room environment screen cabinet main power switch traction wheel speed limiter shaft and pit guide rail layer door and car counterweight should be reliably fixed with pressure plates to prevent loosening.

Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway

.When accidentally trapped in an elevator, one should remain calm, press the alarm bell inside the elevator,HaFully electric high-altitude reclaimer, and call the elevator emergency rescue phone or community property phone for help. Do not open doors or mess with buttons, and patiently wait for rescue.

The elevator suddenly opens the door and does not move after leveling, but automatically resumes operation after a few minutes: The elevator (escalator) has been running for too long, and the motor overheats. To prevent burning out, the elevator does not stop: to avoid overloading, users can be required to make a circle of beams at a certain height, and disconnected on one side of the elevator entrance. The distance between the center heights of the beams depends on the product model, and should not exceed 2500mm. The beam height should be 300mm and the thickness should be the same as the wall. The lower ring beam is 500-1500mm away from the bottom of the pit, and the higher ring beam is 200-500mm away from the lower surface of the shaft roof. The completed framework with a solid brick structure shaft can be equipped with steel plywood at the position of the fixed guide rail support frame. The position and size of the plywood are provided by the elevator, and the user is responsible for providing materials and construction. If the shaft structure is made of hollow bricks without ring beams, steel beams can be considered to be added between the frames for rectification.

Household elevators must be regularly maintained to confirm their safety and whether they can continue to operate, while also repairing any faults and hidden dangers found.

superior quality.When passengers are riding on the escalator, they may lose their balance and fall due to leaning against the skirt board on the side of the escalator, which does not move,HaAluminum alloy mobile lifting platform, but their feet move with the steps. Especially when carrying a lot of packages while taking the elevator, it is more likely to fall on the escalator due to the inability to hold the handrail properly. So, when riding on the escalator, we must stand firmly and support it well,HaElevating stage, and do not lean against the skirt board on the side of the escalator.

Home elevators are different from special products such as public spaces, professional home elevators, villa home elevators, home elevator manufacturers, and small home elevators. They are 20 year old brands with advantages in price and guaranteed quality. Considering the limited installation space lack of dedicated hoistways, and small lifting height, they pursue simplicity and miniaturization in design, and the existence of computer rooms is not necessary. Long term promotion of a domestic elevator manufacturer, a 20 year old brand with competitive prices and guaranteed quality!

When accidentally trapped in an elevator, one should remain calm, press the alarm bell inside the elevator, and call the elevator emergency rescue phone or community property phone for help. Do not open doors or mess with buttons, and patiently wait for rescue.

HaHydraulic turnover machineProduct desciption

How much is it.Mine elevators are used for transporting personnel and goods in mines. Special elevators are designed for special environmental conditions, anti-corrosion, and heat-resistant elevators

Brick concrete structure elevator shaft: For unfinished brick structure shafts, users can be required to make a circle of beams at a certain height, arranged on three sides, and disconnected on one side of the elevator entrance. The distance between the center heights of the beams depends on the product model, and should not exceed 2500mm. The beam height should be 300mm, and the thickness should be the same as the wall. The lower ring beam is 500-1500mm away from the bottom of the pit, and the higher ring beam is 200-500mm away from the lower surface of the shaft roof. The completed framework with a solid brick structure shaft can be equipped with steel plywood at the position of the fixed guide rail support frame. The position and size of the plywood are provided by the elevator, and the user is responsible for providing materials and construction. If the shaft structure is made of hollow bricks without ring beams, steel beams can be considered to be added between the frames for rectification.

In daily life, elevators are a commonly used tool that brings us a lot of convenience. But how much do you know about the types and safety knowledge of elevators?

Ha.2. Different types of civil engineering traction elevators, screw elevators and hydraulic elevators have different requirements for civil engineering. Common traction elevators require a certain amount of hoistway space, which can be made of concrete, steel structure hoistways, and glass curtain walls to create sightseeing elevators; The depth of the pit should be at least 50cm or more; Additionally, there are certain requirements for the height of the top floor.

Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway