GaopingSmall lWhen using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
The working principle of the elevator is that hydraulic oil forms a certain pressure through a vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil from the upper end of the hydraulic cylinder returns to the oil tank through an explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
Gaoping.At present, high-quality electric elevators on the market generally use lithium batteries during use. If they are charged quickly, the battery life will be longer. On the contrary, work efficiency cannot be guaranteed during operation. Many fields choose electric elevators in the transportation process because it saves a lot of manpower and labor. If manual handling is carried out, it not only takes time and effort, but also has a relatively high labor cost. On the contrary, if electric elevators are used it can improve efficiency and, importantly reduce the risk of accidents.
The situation and content of the lifting platform are very crucial. During the process, the current and other operations are also crucial. In order to make the heavy object descend smoothly, improve the safety and reliability of braking, and also understand the balance situation during the setting process. It can maintain pressure and prevent the descent speed from being affected by heavy objects, as well as its lifting speed, Make it more reliable and secure. Overall, when selecting and using equipment, one should understand the working principle, some information about the lifting platform, and be able to consider some design principles and situations when operating.
.The curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position, it can operate while walking,Gaoping4 ton fixed lifting platform, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, electrical and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
What are the applicable ranges of guide rail hydraulic lifting platforms?
The fixed lifting platform has a very obvious advantage over other types of work platforms, people often use fixed lifting platforms for operation.
The curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
At present, the battery life will be longer. On the contrary, if non lithium batteries are used, work efficiency cannot be guaranteed during operation. Many fields choose electric elevators in the transportation process because it saves a lot of manpower and labor. If manual handling is carried out, but also has a relatively high labor cost. On the contrary, if electric elevators are used, it can improve efficiency and, importantly, reduce the risk of accidents.
When using an electric lifting platform, there are many details that need to be noted, such as placing it on a flat surface during use to prevent tipping during work. In addition, what are the precautions for using electric lifting platforms?
Variable cost.In the process of understanding, the selection of lifting platforms has strong flexibility to a certain extent. When conducting procurement,GaopingFixed scissor lift, people should pay attention to these situations and contents, as well as some core influencing factors and situations. If there are other considerations when using these equipment, people can better use them for equipment selection and use. The selection of lifting platforms should take into account these specific usage situations.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator, and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use, so as to facilitate its use.
quality standard.Of course,GaopingFixed lifting platform, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
In terms of occupied space, most fixed lifting platforms are relatively large in volume and are not suitable for placing in places with small areas and low heights. If forced into such a place, not only will the lifting platform fail to function, but some parts of the place may also be damaged. Therefore, it is important to pay attention to the space it occupies. If it takes up too much space and the height of the workshop where the lifting platform is needed is insufficient, it is necessary to choose another lifting platform.
Mobile lifting platforms are divided into: four wheel mobile lifting platforms, two wheel traction lifting platforms, modified car lifting platforms, hand push lifting platforms, hand operated lifting platforms, AC/DC dual purpose lifting platforms, car mounted lifting platforms, self-propelled lifting platforms, diesel engine curved arm self lifting platforms, folding arm lifting platforms, sleeve type lifting platforms, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Safe operation voltage; Select rolling guide shoes, with high accuracy, wear resistance, and smooth lifting.
When using equipment, people will consider different information and situations, and reference them based on these elements. Therefore, when using electric elevators, it can bring better work efficiency to people, and also enable them to achieve certain efficiency during the use process. Many manufacturers can cooperate with some very professional companies when designing products. Because material selection also meets strict requirements and standards, it can provide customers with better quality choices when designing products.