Tissau yverosA
Tissau yverosAThe standard rack free design of the lifting and lowering machine with high safety performance ensures that the platform will not fall, and the limit and limit switches further ensure the safety of construction personnel.
Three masts aluminum alloy elevator: The main structure is made of high-quality high-strength aluminum profiles, with super large load capacity and working stability. The overall lifting guardrail device has good strength, greatly reducing the overall height during transportation, and making loading and unloading convenient. This machine has strong load-bearing capacity and is suitable for 2-3 people to climb heights simultaneously.
Tissau yveros.The higher the number of masts, the better the stability of the elevator, and the greater the stability load on the platform.
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of aluminum alloy elevators. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.
.Driving under the influence of alcohol is strictly prohibited, and ongoing high-altitude operations should also be terminated if feeling unwell.
Strictly follow the operating instructions of the aluminum alloy elevator for safe use, and strictly prohibit illegal operations.
The main components of the Hunter hydraulic fixed elevator are: 1. The shaft part is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior. 2. The driving part is equipped with a hydraulic drive motor, oil pump, and safety valve, A small oil tank for hydraulic components such as speed control valves and directional valves: 3. The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: 4. The door system part: It is a closed or mesh platform door or landing door system composed of steel structure, with manual and automatic doors. Generally, open platforms do not have doors. 5. The electrical part: It includes power, signal, Composition of safety and lighting devices: 6 Platform parts: It is a steel structure platform that carries heavy objects, which can be closed (i.e. cabin type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators, we need to regularly inspect, maintain, and maintain them,Tissau yveros8-meter aluminum alloy lifting platform, which can not only extend the service life of the aluminum alloy elevator, Can make it work with greater power! For example, the transmission part should have sufficient oil, and vulnerable parts must be regularly inspected, repaired, or replaced. Mechanical bolts, especially parts that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next, let's take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).
The lifting product has a sturdy structure, large load-bearing capacity, stable lifting, simple and convenient installation and maintenance, making it an ideal economic and practical cargo conveying equipment for replacing elevators between low floors. If the required size is large, a fixed double span hydraulic lift can be used. The double span lift is stable, has a large bearing capacity, and is easy to operate. It is widely used in industries such as vehicle maintenance, kilns, as they only consume the necessary energy for operation.
The protected leg structure makes work safer and can be used for lifting and lowering operations close to the working face.
Direct labor.Good driving performance reduces noise, increases the clearance inside the platform, and also makes the transmission smoother and the mechanism vibrates less.
Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
Strictly follow the operating instructions of the aluminum alloy elevator for safe use, and strictly prohibit illegal operations.
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of aluminum alloy elevators. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.
quality index.The reduction gearbox, gearbox external meshing gear and other parts, as well as the hydraulic oil, are all carried out according to the requirements in the table. We provide various aluminum alloy elevator manufacturers to individuals and enterprises nationwide for a long time, you can proceed with the assembly of the guide rail frame, attachment frame and cable guide frame.
Firstly,Tissau yveros4-meter aluminum alloy elevator, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the aluminum alloy elevator, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the aluminum alloy elevator. If it is necessary for maintenance work, after the maintenance is completed, it is necessary to ensure that the spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When hydraulic aluminum alloy elevator maintenance requires entering the platform for internal work, after the aluminum alloy elevator is lifted, the working surface of the aluminum alloy elevator must be fixed or supported firmly with a crane or other equipment
Tissau yveros.Working on an aluminum alloy elevator workbench. Must wear safety belts, helmets, and other tools to prevent accidents.
The scientific design schemes for aluminum alloy elevators mainly include leveling and locking circuits telescopic balance circuits, variable amplitude balance circuits,Tissau yverosMobile lifting aluminum alloy elevator, emergency lowering systems, etc. In order to prevent sudden damage to the hydraulic system or pipelines of the platform due to accidents, and to ensure that the workbench does not experience situations that endanger the safety of personnel and equipment such as sudden arm fall or workbench overturning, we have designed different solutions for each system according to its different conditions.
Machine manufacturers and other related businesses. Merchants with this business are welcome