MonzaEngineering lifting platform vehicleContinuous upgrading of production technology

After the lifting platform truck is used, the operator stops the platform at the bottom, turns off the key power switch and turns off the main power supply.

To meet the needs of choreographers and choreographers in different plays, different heights of the lifting platform can be used to change the shape of the stage according to the requirements of the choreographers and choreographers, in order to adapt to the requirements of the plot for the scenery or venue, and save manpower and material resources for setting up. Utilizing the tilting device of the lifting platform to form a tilting table, which can better highlight the effect in various performances.

Monza.In campus, various physical protective equipment needs to be installed. In this case, hydraulic elevators are needed to enhance the safety awareness of the campus. What are the advantages of using hydraulic elevators on campus?

When a hydraulic lifting platform truck malfunctions, it is necessary to take time to prepare accordingly, and provide timely feedback or communicate with the manufacturer at this time. If a voltage range is used to detect a hydraulic lifting platform truck,MonzaHand lift platform truck, it is necessary to turn on the power in this case. The circuit schematic is used to measure the electrical circuit. At this time,MonzaLifting operation platform truck, the voltage value can be measured,MonzaScissor type lifting platform truck, and the voltage value can also understand where the fault point is. Therefore, it is necessary to learn to analyze.

.What is the difference between a hydraulic lifting platform truck and a cargo elevator?

The onboard weight of the lifting platform is, and it must not be overloaded.

However, it is strictly prohibited to use switches that form limit switches or stop running. These details are very important, and when encountering strong winds or ice the operation should be immediately stopped and the power should be cut off by pulling the switch.

To meet the needs of stage craftsmanship and layout; Product; In the music and dance theater stage arranged in a zigzag pattern, auxiliary lifting platforms are often arranged in front, back, left, and right of the main stage lifting platform. The side and rear auxiliary lifting platforms are used for the smooth opening of the side platform and rear vehicle turntable, while the front auxiliary lifting platform is used to place the rear vehicle turntable near the platform entrance. The leveling lifting platform below the side platform and rear vehicle turntable can be used to level the platform after the side platform or rear vehicle turntable is driven out, so that the entire platform does not have a height difference, ensuring the safety of the cast members.

Security settings. Manufacturers specializing in the production and manufacturing of electric lifting platform vehicles not only pay attention to the effectiveness of equipment usage, but also attach great importance to safety settings in their daily production and manufacturing process. Basically, this type of platform will have corresponding security settings during the application process, which means that the usage process will be very secure. In addition, the quality of the materials used is relatively high, which also indicates from another perspective that this type of lifting platform truck is very safe and reliable in the application process.

Before using the lifting platform vehicle, first check whether the doors of each floor are closed and whether the emergency stop switch is reset (the emergency stop switch is reset, rotate clockwise), and check the side of the emergency stop switch. After completion, the operation can be started.

Product survey.There are many details that need to be paid attention to when using an electric lifting platform car, such as placing it on a flat surface during use to prevent tipping during work. In addition, what are the precautions for using electric lifting platform vehicles?

If encountering or affecting the safety technical performance of construction elevators, it is necessary to provide more than 6 months before proceeding, and it is also necessary to retest the construction elevators and test the acceptance results before proceeding. Therefore, it is necessary to follow the instructions of the construction elevator. The main purpose of repairing or maintaining the elevator is to ensure that each component can operate well. For factory elevators, rated load tests are required. Especially for elevators under construction, it is necessary to conduct a rated weight drop test every three months, cut off the power supply during maintenance, and set up eye-catching warning signs. Construction elevators with safety hazards are not allowed to be used.

Nowadays, electric lifting platforms are widely used in households, especially for those who are inconvenient to go upstairs and downstairs. However, when making a purchase it is important to understand its specifications. Generally, 1-2 people can use this device because the speed of its ascent and descent is relatively slow. However, if obstacles are encountered during the ascent or descent process, there will be an emergency stop at the set height.

To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.

Good quality.However, it is strictly prohibited to use switches that form limit switches or stop running. These details are very important, and when encountering strong winds or ice, the operator stops the platform at the bottom, closes the landing door, turns off the key power switch, and turns off the main power supply.

Monza.When using an elevating platform truck to transport goods up and down, try to place the goods in the middle of the lift car as much as possible to avoid tilting or getting stuck during operation, and do not start the platform when the goods are not stacked stably.

According to the needs of the plot, creating a special atmosphere and effects can be achieved through stage machinery. Even simple stage machinery often participates in performance activities, creating unexpected atmospheres and effects according to the needs of the plot. For example, using the low-speed descent of the lifting platform to represent a sunken ship in the sea, using the valves on the lifting platform and the sudden disappearance and appearance of actors on the lifting platform.

The above detailed introduction, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators, and these details cannot be ignored during the use process.