AshburnSelf propelled electric elevatorTo inject fresh blood

During normal operation the horizontal distance between the closed cage door and the closed landing door should not exceed 150mm. Otherwise, measures should be taken to make it meet the requirements, or side protection devices at the entrance of the landing station that meet the requirements should be equipped. The distance between any opening between the side protection device and the hanging cage or landing door should not exceed 150mm.

The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements, otherwise protective measures shall be taken.

Ashburn.Limit switches should be triggered directly by the movement of the suspension cage or its related components.

Construction electric elevators should be equipped with cable guide frames and comply with regulatory requirements.

.Setting requirements: Before starting work every day and changing shifts, the driver of the construction electric elevator should inspect the construction electric elevator according to the requirements of the user manual and specifications,AshburnElectric tricycle elevator, record the inspection results and report any problems found to the user unit.

Construction electric elevators outside the lightning protection range

The motor of the hydraulic guide rail lifting platform is set around the wellbore, occupying a relatively small area,AshburnIndoor small electric elevator,AshburnElectric elevator lifting 10 meters, improving the utilization rate of the wellbore area.

The quality of the standard section should comply with the product manual and specification requirements.

Setting requirements: The up travel (limit) switch should be able to automatically stop the cage running at the rated speed before reaching the upper limit switch, but should not trigger the up travel (limit) switch as high

Before operating the construction electric elevator, routine inspections should be carried out according to regulations and inspection records should be filled out.

Direct labor.The entrance of each landing platform must be equipped with a landing door, which must open towards the landing platform side, and the door bolt must be set on the side next to the construction electric elevator.

The connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.

Mechanical devices controlled by cage movement should not be used to open or close the landing door.

Setting requirements: The installation and dismantling workers, electricians, and other operators of construction electric elevators should have special construction operations.

Quality improvement.During normal operation, measures should be taken to make it meet the requirements, or side protection devices at the entrance of the landing station that meet the requirements should be equipped. The distance between any opening between the side protection device and the hanging cage or landing door should not exceed 150mm.

Check whether the sealing of components such as the oil cylinder, and motor of the aluminum alloy electric elevator is good and whether there is any air leakage.

When the landing door is closed, the full width of the lifting passage opening should be covered.

Ashburn.Later, when there is a major malfunction of the lifting platform, it should be repaired by professional personnel as soon as possible. After the malfunction occurs, it should not be used again to avoid accidents, personnel and property losses.

When a rigid 5000mm2 square or circular flat surface is applied with a normal force of 600N to either side of the door, the door may not meet the above requirements, but safety should be maintained.

During normal operation, the horizontal distance between the closed cage door and the closed landing door should not exceed 150mm. Otherwise, measures should be taken to make it meet the requirements, or side protection devices at the entrance of the landing station that meet the requirements should be equipped. The distance between any opening between the side protection device and the hanging cage or landing door should not exceed 150mm.