PumacilIndoor electric elevatorAnalytical frequency conversion energy saving principle

announcer:hp935HP175192871 release time:2024-02-17 09:23:46

Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.

Operating cost advantage and low failure rate: Due to the use of advanced hydraulic systems and good methods, the operating failure rate can be reduced to a low level.

Pumacil.Degrees, m/s.

The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.

.Setting requirements: Before starting work every day and changing shifts, the driver of the construction electric elevator should inspect the construction electric elevator according to the requirements of the user manual and specifications, record the inspection results, and report any problems found to the user unit.

To meet the needs of stage craftsmanship and layout; Product; In the music and dance theater stage arranged in a zigzag pattern, auxiliary lifting platforms are often arranged in front, back, left,PumacilElectric elevator lifting platform, so that the entire platform does not have a height difference, ensuring the safety of the cast members.

The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.


PumacilIndoor electric elevatorAnalytical frequency conversion energy saving principle



The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.

Degrees, m/s.

The oil cylinder and sealing components are made of imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.

Service first.When a rigid 5000mm2 square or circular flat surface is applied with a normal force of 600N to either side of the door, the door may not meet the above requirements, but safety should be maintained.

In addition to ground protective fences low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between 1m and 2m. And there should be at least protective railings, a half height middle crossbar, and a toe board at least 150mm above the ground.

The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements, otherwise protective measures shall be taken.


PumacilIndoor electric elevatorAnalytical frequency conversion energy saving principle



Use floor doors and cage door devices on construction sites where conditions permit.

Direct material.The entrance of each landing platform must be equipped with a landing door which must open towards the landing platform side, and the door bolt must be set on the side next to the construction electric elevator.

How to determine the sufficient amount of clean oil for the hydraulic station of an electric elevator? Why cannot water be used to flush the hydraulic station of an electric elevator?

Setting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.

Pumacil.The bearing capacity of the building structure at the attachment point of the wall bracket should meet the requirements specified in the user manual for construction electric elevators.

Stage equipment safety door. To prevent personnel from extending their heads, hands,Pumacil3 meter electric elevator, and feet out of the shaft and objects from falling into the vertical shaft. Its vertical position should be closed, its cabin should be full of doors, and the height of the hoistway (hall door) should not be less than 8 meters; The electric door opening and closing switches should be removed from the vertical and passenger compartment doors. In order to prevent accidents caused by vertical, passenger car doors, and car roof doors not being closed.; Door interlocks should be installed on both the vertical and passenger compartment doors.

According to the needs of different performance genres, the form of the stage can be changed. For example, using an orchestra pit lift can combine a framed stage with a large lip or even an extended stage. In an experimental theater, using a lift can make the theater have various forms such as an end stage, an extended stage,PumacilElectric elevator factory, an island stage, an intermediate stage, a T-shaped stage, or a hall.