HamSupply fixe
HamSmall liftiEspecially when its pipes are in use, they are quite boring and can roll, so in this case, they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms, it is not allowed to carry people during use, and it is strictly prohibited to carry people. If the electric lifting platform carries people during use, it is equipped with railings or anti crack valves, which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
Select the elevator dedicated leveling permanent magnet switch, which has a good leveling effect.
Ham.Fixed lifting platforms with strong load carrying capacity usually occupy more space. If a company needs to use a lifting platform with a large load capacity and the space in the workshop is relatively small, it is good to adjust the layout of the workshop to make it more compact and place more equipment. When selecting a lifting platform, a company should not only focus on its occupied space and load capacity, but also pay attention to its price. If the price is too high, forcing it may affect the company's cash flow and be detrimental to the company's operations.
It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use, so as to facilitate its use.
.To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, maintenance, and climbing operations in industries such as municipal engineering, electricity, street lighting, advertising, communication, photography, landscaping, transportation, docks, airports and ports and large industrial and mining enterprises.
Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels,HamSjg fixed lifting platform,HamMobile small lifting platform, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades or the installation and maintenance of power systems. This elevator has the advantages of light weight, electric starting, self supporting legs, simple operation, large working area, and with the help of different layers of goods lifting these electrical appliances have a lot of protective work or are very important, they should be able to meet certain requirements. The structure of each product is very large and the load-bearing capacity is also very large, and the lifting is very smooth and smooth. So during the installation process, these lifting platforms can achieve higher work efficiency, and there will also be professional operators who can use them better during operation.
The current stage effect is very important, and if you want to meet the corresponding requirements, you need to apply it to the lifting stage. But now there are many types of lifting and lowering stages on the market, and many people have no way to start when making purchases. So
Especially when its pipes are in use, they are quite boring and can roll, so in this case, it is not allowed to carry people during use so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms, and it is strictly prohibited to carry people. If the electric lifting platform carries people during use,HamSmall 3-meter lifting platform, it is equipped with railings or anti crack valves, which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
Executive standard.Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, installation issues dirt issues)
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
In the process of understanding, the selection of lifting platforms has strong flexibility to a certain extent. When conducting procurement, people should pay attention to these situations and contents, as well as some core influencing factors and situations. If there are other considerations when using these equipment, people can better use them for equipment selection and use. The selection of lifting platforms should take into account these specific usage situations.
Industry management.For lifting platforms without manned protection, it is strictly prohibited to carry people during use. At the same time, attention should be paid during use to prevent damage to hands, feet, and clothing.
In terms of occupied space, most fixed lifting platforms are relatively large in volume and are not suitable for placing in places with small areas and low heights. If forced into such a place, not only will the lifting platform fail to function, but some parts of the place may also be damaged. Therefore, when selecting a fixed lifting platform, it is important to pay attention to the space it occupies. If it takes up too much space and the height of the workshop where the lifting platform is needed is insufficient, it is necessary to choose another lifting platform.
Fixed lifting platforms are widely used in many industrial fields, and their work efficiency is very high during use, which can greatly save people's work time and improve work efficiency.
Ham.Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, which can cross obstacles for high-altitude operations. When the platform is lifted to any position so as to facilitate its use.
The curved arm elevator is a lifting equipment used for high-altitude operations, it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.