South BostonHy
South BostonThThe rust prevention work of aerial work vehicles is generally something that needs to be paid attention to when they have not been used for a long time. How should we do anti-corrosion on the body of aerial work vehicles? This is actually a simple matter of not having to spend money on anti-corrosion at the repair station. As long as we car owners use some materials they can find on their own, we can achieve this. At the same time, paying attention to driving habits can ensure that high-altitude work vehicles do not rust. Here are a few points for reference.
Carefully prepare a special construction plan for installation and construction and provide safety technical disclosure to installation personnel.
South Boston.The main structure and purpose of the guide rail type elevator are closed gear transmission, and the large and small gears are made of steel. After quenching and tempering treatment, they belong to the soft tooth surface. Due to the common failure form of closed soft tooth surface gear transmission is tooth surface pitting, the design is calculated based on the tooth surface fatigue strength and checked based on the tooth root bending fatigue strength. The bracket bracket is used to fix and support all mechanical parts and some electrical components of the lifting chassis. It is mainly welded from parts such as side plates, connecting pipes, and connecting pieces, and all materials are selected. The thickness of the two side plates is selected, and in order to reduce the weight of the bracket, many process holes are designed on the two side plates. Worm gear and worm gear have the advantages of large transmission ratio, compact structure, small impact load, smooth transmission, low noise, and the characteristic of reverse self-locking due to the worm gear and worm mechanism. It can ensure that the transmission mechanism can lock itself when the motor is powered off during patient transportation, so a worm gear reducer is selected. The involute worm is used, and its spiral surface is quenched to improve transmission efficiency and increase wear resistance. The worm gear material is made of polyformaldehyde. Plastic worm gears have the advantages of good processing economy,South BostonUltra low hydraulic lifting platform, vibration and noise reduction,South BostonHydraulic automatic lifting platform, light weight, wear resistance, and self control, making the design of elevators more humanized.
Attention should be paid to inspecting whether each steel wire rope has broken wires and loose strands. If it exceeds the relevant regulations, it must be replaced immediately. The care and maintenance of steel wire ropes should strictly follow the regulations.
.The rust prevention work of aerial work vehicles is generally something that needs to be paid attention to when they have not been used for a long time. How should we do anti-corrosion on the body of aerial work vehicles? This is actually a simple matter of not having to spend money on anti-corrosion at the repair station. As long as we car owners use some materials they can find on their own, we can achieve this. At the same time, paying attention to driving habits can ensure that high-altitude work vehicles do not rust. Here are a few points for reference.
Each box, distribution box, etc. is usually kept clean, and dust on electrical equipment should be quickly swept away.
How to use a hydraulic elevator and whether the emergency stop device is effective is very important during use. If special circumstances arise, before use, it is necessary to carefully check whether all items are normal and ensure the effectiveness of the braking device.
Mobile elevators are generally used in skyscrapers where electric elevators are used, as there is no need to stop midway, so fast elevators are needed. First go to the high-rise sky lobby (high-rise elevator lobby, Skylobby) from the ground, and then transfer to the ordinary elevator to the destination. Some new elevators use elevator pre calling systems, while others are set up in the cabin, so that customers can enjoy the scenery outside while riding.
Do not adjust the solenoid valve on the motor arbitrarily. The solenoid valve is pre adjusted before leaving the factory, and random adjustment can easily cause internal pressure to increase or decrease. In severe cases, it can shorten the service life of the motor.
For the introduction of daily maintenance of lifting cargo elevators, the brakes of each organization should usually be inspected and adjusted to ensure sensitivity and reliability. On the surface, there should be no dirt present. If there is any dirt, it must be washed off with gasoline or thinner.
Online consultation.The anti-corrosion measures for the body of high-altitude work vehicles should pay attention to small scratches. The paint surface of high-altitude work vehicles often corrodes. In addition to common collisions, scratches, and small rocks on the driving tires, there can also be a peeling point, which will cause a small rust over time. Because most of these scars are small and easily overlooked. Therefore, regular inspections should be conducted on the engine hood and surrounding areas. Once discovered,South BostonElectric self hydraulic lifting platform, it is necessary to promptly go to a professional beauty shop for processing.
Attention should be paid to inspecting whether each steel wire rope has broken wires and loose strands. If it exceeds the relevant regulations it must be replaced immediately. The care and maintenance of steel wire ropes should strictly follow the regulations.
Ensure excellent power supply at the installation site, install a separate distribution box, and the electrical leakage switch must meet the requirements for construction elevators when using the distribution box. If the installed construction elevator is variable frequency, the leakage switch should be compatible with the frequency converter when selecting it.
The key to using a hydraulic elevator during normal operation is to determine whether it is operating normally and whether there is noise based on its operating sound.
Standard requirements.It is necessary to regularly inspect the brake of the guide rail type cargo elevator, and there should be no dirt on the friction surface.
Check the rollers, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Add oil to the above components for maintenance of outdoor elevators and factory elevators. Extend the service life of bearings.
Now that you understand how to use a hydraulic lift, it provides us with a safe working environment for our operators and improves the efficiency and quality of the lowering work.
South Boston.The application scenarios of mobile elevators may require several or even dozens of passenger elevators in some office buildings and hospitals. In order to increase the speed, efficiency and usable area of electric elevators, most high-rise buildings will divide electric elevators into arrays, with each group responsible for a portion of the floors, and make different adjustments and scheduling based on the usage mode of different floors at different times.
It is necessary to regularly inspect the brake of the guide rail type cargo elevator, and there should be no dirt on the friction surface.
The rust prevention work of aerial work vehicles is generally something that needs to be paid attention to when they have not been used for a long time. How should we do anti-corrosion on the body of aerial work vehicles? This is actually a simple matter of not having to spend money on anti-corrosion at the repair station. As long as we car owners use some materials they can find on their own, we can achieve this. At the same time, paying attention to driving habits can ensure that high-altitude work vehicles do not rust. Here are a few points for reference.