It is necessary to consider the usage needs of the scissor fork type lifting platform truck, as its rated load is completely different, generally between 1000 kilograms and 4000 kilograms, and its height is also completely different. The height includes 205 millimeters to 250 millimeters, and the height can reach 1300 millimeters, while the size of the table is also up to
After starting work every day, the elevator driver needs to carry out standardized operations. Of course, before carrying out the operation, the elevator needs to be inspected to ensure its safety before proceeding with the operation. The user unit needs to conduct a comprehensive inspection of the construction elevator every month and record the inspection results accordingly.
Darmstadt.High stability of manufacturing materials. Usually, manufacturers can choose a variety of manufacturing materials when producing fixed loading and unloading platforms, and each material brings different effects when used. And for
When using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
.When using a hydraulic lifting cargo elevator, it is necessary to have corresponding inspection routes. If the route malfunctions and the joint becomes loose, there may be short lines or damaged components. Using a table for inspection is relatively better.
When using, the weight should be evenly distributed, mainly in the center of the countertop. However, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
However, before the electric cargo elevator is put into use,DarmstadtElevating platform vehicle for high-altitude operations, which is conducted every three months. During the fall test, adjustments need to be made, and the braking distance during the fall process should not exceed 2 meters. The safety device needs to be reset every time it falls. Of course, the safety device needs to be adjusted or repaired accordingly, These all need to be carried out by the manufacturer or established recognized unit, especially the anti fall test requires professional personnel to operate.
However, it is strictly prohibited to use switches that form limit switches or stop running. These details are very important, and when encountering strong winds or ice, the operation should be immediately stopped and the power should be cut off by pulling the switch.
Skills are selected based on market rankings. Nowadays various industries have corresponding market rankings in the process of continuous development
In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
demand.In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
After the lifting platform truck is used, the operator stops the platform at the bottom, closes the landing door, turns off the key power switch, and turns off the main power supply.
To understand the operation of the mechanism, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear,DarmstadtContainer lifting platform truck, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
If encountering or affecting the safety technical performance of construction elevators, it is necessary to provide more than 6 months before proceeding, and it is also necessary to retest the construction elevators and test the acceptance results before proceeding. Therefore, this point requires everyone's attention and understanding. When carrying out repairs or maintenance, it is necessary to follow the instructions of the construction elevator. The main purpose of repairing or maintaining the elevator is to ensure that each component can operate well. For factory elevators, rated load tests are required. Especially for elevators under construction, it is necessary to conduct a rated weight drop test every three months, cut off the power supply during maintenance, and set up eye-catching warning signs. Construction elevators with safety hazards are not allowed to be used.
knowledge.The onboard weight of the lifting platform is, and it must not be overloaded.
The situation and content of the lifting platform car are very crucial. During the process, the current and other operations are also crucial. In order to make the heavy object descend smoothly, improve the safety and reliability of braking, and understand these balance situations during the setting process, it is possible to maintain pressure and prevent the descent speed from being affected by heavy objects, as well as its lifting speed Make it more reliable and secure. Overall, when selecting and using equipment, one should understand the working principle, some information about the lifting platform vehicle, and be able to consider some design principles and situations when operating.
According to the needs of different performance genres, the form of the stage can be changed. For example, using an orchestra pit lift can combine a framed stage with a large lip or even an extended stage. In an experimental theater, using a lift can make the theater have various forms such as an end stage an extended stage, an island stage, an intermediate stage, a T-shaped stage, or a hall.
Darmstadt.The role of a lifting stage in a theater is roughly as follows: the main lifting platform arranged in the main performance area of the stage is mainly used for rapid changing of scenery. Typically, with” Product; In the music and dance theater stage arranged in a zigzag pattern,DarmstadtHand operated lifting platform truck, the lifting platform, side car platform, and rear car turntable perform a rapid transformation of the entire or partial scene. This arrangement allows for rapid switching of three full sets.
However, it should be noted that construction elevators with safety hazards cannot be used. If the accessories of the construction elevator are severe during use, it is necessary to provide more than 6 months before proceeding, and it is also necessary to retest the construction elevators and test the acceptance results before proceeding. Therefore, this point requires everyone's attention and understanding. When carrying out repairs or maintenance, it is necessary to follow the instructions of the construction elevator. The main purpose of repairing or maintaining the elevator is to ensure that each component can operate well. For factory elevators, rated load tests are required. Especially for elevators under construction, it is necessary to conduct a rated weight drop test every three months, cut off the power supply during maintenance, and set up eye-catching warning signs. Construction elevators with safety hazards are not allowed to be used.