MohakiSelf propelled lifting platform truckWhat is the high fuel consumption of anti-corrosion

The above detailed introduction, I believe everyone can have a comprehensive understanding of the electric lifting platform. During the use process, these details cannot be ignored,Mohaki7-meter lifting platform car, and when making purchases, it is necessary to choose according to personal needs.

However before the electric cargo elevator is put into use, it needs to undergo a fall test, which is conducted every three months. During the fall test, adjustments need to be made, and the braking distance during the fall process should not exceed 2 meters. The safety device needs to be reset every time it falls. Of course, the safety device needs to be adjusted or repaired accordingly, These all need to be carried out by the manufacturer or established recognized unit, especially the anti fall test requires professional personnel to operate.

Mohaki.Electric lifting platform trucks are commonly used because they facilitate the transportation or loading and unloading of goods between floors, and are now widely used in many fields. So what should be paid attention to during the use of electric lifting platform vehicles?

Elevator operators need to strictly comply with safety operating procedures during the operation process, in order to pay attention to relevant matters, especially before the operation, they need to focus on routine inspections or maintenance work. It is important to hold a special operation certificate before starting work.

.What is the difference between a hydraulic lifting platform truck and a cargo elevator?

When using a hydraulic lifting platform truck there are many details that cannot be ignored. It mainly uses an external power supply, so when operating, the staff needs to master its operating knowledge, which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route which is the basic content. So in addition, what preparations do hydraulic elevators need to master during use?

According to the needs of different performance genres, using an orchestra pit lift can combine a framed stage with a large lip or even an extended stage. In an experimental theater, using a lift can make the theater have various forms such as an end stage, an extended stage, an island stage, an intermediate stage, a T-shaped stage, or a hall.

Many theaters use a lifting platform as a vertical transportation tool for goods. The rear of the main stage or the end of the side stage in many theaters are equipped with a set container transportation lifting platform, which is used to vertically transport items from the ground to a designated location or even the stage plane. The lifting platform of the music pool is often used for transporting movable seats, etc. The layout and size of the lifting platform are often in line with the performance area of the box shaped mirror frame stage. Different plays require different sizes of performance areas, and the main stage lifting platform usually covers both the performance area and the foreground area. According to the requirements of stage process layout, when there is a side stage and a side car platform is set, corresponding auxiliary lifting tables and leveling lifting tables are set at the corresponding positions. When there is a rear stage and a car mounted turntable is set, these parts should be better designed and meet certain quality requirements when working in the air. The center of the loaded machine should be in the center position of the workbench. During activities, it is important to understand the usage of these devices. Protective barriers play a very important role in protecting them. When adjusting these directions or starting the motor system during use, it should be possible to pull them to these designated positions for operation, in order to achieve better work.

The onboard weight of the lifting platform is, and it must not be overloaded.

Welcome calls .To meet the needs of stage craftsmanship and layout; Product; In the music and dance theater stage arranged in a zigzag pattern,MohakiLifting platform vehicle movement, auxiliary lifting platforms are often arranged in front, back, left, and right of the main stage lifting platform. The side and rear auxiliary lifting platforms are used for the smooth opening of the side platform and rear vehicle turntable, while the front auxiliary lifting platform is used to place the rear vehicle turntable near the platform entrance. The leveling lifting platform below the side platform and rear vehicle turntable can be used to level the platform after the side platform or rear vehicle turntable is driven out, ensuring the safety of the cast members.

At the same time, the elevator can work efficiently during use, such as on a 50 meter or 10 meter high workbench. If traditional methods are used, this work will take a relatively long time. However, using the elevator can continuously adjust the structure and reinforce it during movement, which can improve work efficiency and complete this work in a short time, It can be seen that elevators have many advantages during use.

This device is safer and more reliable during use. Due to the manual construction and production of steel pipe scaffolding, there are situations of non-standard or material wear during the design process of the structure. Local instability can also have some impacts, and inadequate protective measures can have a significant impact. Especially when there are significant safety hazards for items or personnel during the operation process, the use of mechanical adjustment structures can ensure that the lifting process can always maintain a horizontal state, which is also the advantage of using elevators. During use, it can be ensured that the lifting process can maintain a horizontal state and form a stable support structure, so the safety factor of the elevator during use is relatively high.

If encountering or affecting the safety technical performance of construction elevators, and it is also necessary to retest the construction elevators and test the acceptance results before proceeding. Therefore, this point requires everyone's attention and understanding. When carrying out repairs or maintenance, it is necessary to follow the instructions of the construction elevator. The main purpose of repairing or maintaining the elevator is to ensure that each component can operate well. For factory elevators, rated load tests are required. Especially for elevators under construction, it is necessary to conduct a rated weight drop test every three months, cut off the power supply during maintenance, and set up eye-catching warning signs. Construction elevators with safety hazards are not allowed to be used.

Quality inspection report.Before using the lifting platform vehicle, first check whether the doors of each floor are closed and whether the emergency stop switch is reset (the emergency stop switch is reset, rotate clockwise), and check the side of the emergency stop switch. After completion the operation can be started.

Because hydraulic elevators have the function of automatic and flexible lifting, they can provide protection for the safety of the campus and surrounding areas. Hydraulic elevators have many advantages, such as the ability to use hydraulic drive, which makes it easy to maintain their lifting speed. This is also determined by the reliability or durability of hydraulic methods. Of course, it also has no blind spots and is sturdy and reliable during normal use. The important thing is that the possibility of compression and collision resistance is relatively small, so it is very convenient to use, and it is beautiful and durable. Among them, its guidance is relatively good with the characteristics of flexibility, reliability, and collision resistance.

After starting work every day, the elevator driver needs to carry out standardized operations. Of course, before carrying out the operation, the elevator needs to be inspected to ensure its safety before proceeding with the operation. The user unit needs to conduct a comprehensive inspection of the construction elevator every month and record the inspection results accordingly.

Mohaki.When using, mainly in the center of the countertop. However, for special cases,MohakiLifting platform truck for handling, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.

However, it is strictly prohibited to use switches that form limit switches or stop running. These details are very important, and when encountering strong winds or ice, the operation should be immediately stopped and the power should be cut off by pulling the switch.

Manufacturing elevators requires a special equipment manufacturing license and installation and transformation license issued by the National Quality Supervision Bureau. Otherwise, it is illegal equipment. As for the recycling of elevators, it mainly depends on what you do. If you install them after recycling, you need an installation and transformation license, or have qualified units help you install them.