HagueLifting p
HagueSany liftthe operator stops the platform at the bottom, closes the landing door, turns off the key power switch, and turns off the main power supply.
When abnormal situations are found during the use of the platform, the operator should immediately stop the operation of the platform and report to the equipment department for maintenance; If the fault is not resolved, it is prohibited to use and a warning sign is hung.
Hague.The correct operating method should be used, and during the design process, relevant debugging should be carried out. The key technical indicators should be able to meet the design requirements. When using, the electrical system should also be connected to the power supply and meet the specified operating range and standards before operation can be carried out. At the same time, when conducting inspections, the systems of these platforms are also very important. They should be able to check for any leakage, so that they can be used more smoothly in the later stage.
However, and when encountering strong winds or ice, the operation should be immediately stopped and the power should be cut off by pulling the switch.
.Especially when its pipes are in use, they are quite boring and can roll, they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms, it is not allowed to carry people during use and it is strictly prohibited to carry people. If the electric lifting platform truck carries people during use,HagueAircraft container dedicated lifting platform vehicle, the lifting platform is equipped with railings or anti crack valves, which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
When using a hydraulic lifting cargo elevator it is necessary to have corresponding inspection routes. If the route malfunctions and the joint becomes loose, it is necessary to turn it on or off properly. In this case, there may be short lines or damaged components. Using a table for inspection is relatively better.
When using hydraulic elevators check the connections of each part during use and tighten them in a timely manner if there is any looseness. All connecting shafts require the use of split pins in order to ensure sufficient use and better utilization.
Nowadays, electric lifting platforms are widely used in households, especially for those who are inconvenient to go upstairs and downstairs. However, when making a purchase, it is important to understand its specifications. Generally, 1-2 people can use this device because the speed of its ascent and descent is relatively slow. However, if obstacles are encountered during the ascent or descent process, there will be an emergency stop at the set height.
The professional information of aluminum alloy lifting platform vehicles and the development of different equipment are crucial. In the process of understanding, one should be able to understand and pay attention to its automation, as well as understand its innovation in use. Many professional designers will learn about these lifting platform vehicles and their specific usage situations when designing the platform.
The onboard weight of the lifting platform is and it must not be overloaded.
Word of mouth recommendation.When abnormal situations are found during the use of the platform, the operator should immediately stop the operation of the platform and report to the equipment department for maintenance; If the fault is not resolved, it is prohibited to use and a warning sign is hung.
When using an elevating platform truck to transport goods up and down, try to place the goods in the middle of the lift car as much as possible to avoid tilting or getting stuck during operation,HagueLifting platform vehicle movement, and do not start the platform when the goods are not stacked stably.
When using a hydraulic lifting cargo elevator, it is necessary to have corresponding inspection routes. If the route malfunctions and the joint becomes loose, it is necessary to turn it on or off properly. In this case, there may be short lines or damaged components. Using a table for inspection is relatively better.
Everyone knows that many industries use hydraulic elevators, and when using them, it is necessary to ensure the stability of the machine. If the machine is unstable, it will have a significant impact during use. So, what details cannot be ignored during the use of hydraulic elevators?
market.The use of lifting platform vehicles must be operated by personnel designated by the department (registered by the Human Resources and Security Department) and strictly adhere to their work positions; Non designated personnel are not allowed to use it without authorization.
Skills are selected based on market rankings. Nowadays, various industries have corresponding market rankings in the process of continuous development
Many theaters use a lifting platform as a vertical transportation tool for goods. The rear of the main stage or the end of the side stage in many theaters are equipped with a set container transportation lifting platform, which is used to vertically transport items from the ground to a designated location or even the stage plane. The lifting platform of the music pool is often used for transporting movable seats, etc. The layout and size of the lifting platform are often in line with the performance area of the box shaped mirror frame stage. Different plays require different sizes of performance areas, and the main stage lifting platform usually covers both the performance area and the foreground area. According to the requirements of stage process layout, when there is a side stage and a side car platform is set, corresponding auxiliary lifting tables and leveling lifting tables are set at the corresponding positions. When there is a rear stage and a car mounted turntable is set, front and rear auxiliary lifting tables and leveling lifting tables are set at the corresponding positions as needed.
Hague.However, it needs to undergo a fall test, which is conducted every three months. During the fall test, adjustments need to be made, and the braking distance during the fall process should not exceed 2 meters. The safety device needs to be reset every time it falls. Of course, the safety device needs to be adjusted or repaired accordingly, These all need to be carried out by the manufacturer or established recognized unit, especially the anti fall test requires professional personnel to operate.
For lifting platform vehicles without manned protection, it is strictly prohibited to carry people during use. At the same time,HagueCargo lifting platform truck, attention should be paid during use to prevent damage to hands, feet, and clothing.
If encountering or affecting the safety technical performance of construction elevators, it is necessary to provide more than 6 months before proceeding, and it is also necessary to retest the construction elevators and test the acceptance results before proceeding. Therefore, this point requires everyone's attention and understanding. When carrying out repairs or maintenance, it is necessary to follow the instructions of the construction elevator. The main purpose of repairing or maintaining the elevator is to ensure that each component can operate well. For factory elevators, rated load tests are required. Especially for elevators under construction, it is necessary to conduct a rated weight drop test every three months, cut off the power supply during maintenance, and set up eye-catching warning signs. Construction elevators with safety hazards are not allowed to be used.