GreenwichDomes
Greenwich304L 
Makati420 staiAUSTENITIC FERRITIC duplex stainless steel on the basis of austenitic stainless steel, properly increase Cr content and reduce Ni content, and cooperate with remelting treatment to obtain stainless steel with duplex structure of austenite and ferrite (containing 40~60%δ - ferrite). Typical steel grades are
31317 stainless steel (see the following for the properties of 317 stainless steel) is a kind of stainless steel containing molybdenum. The molybdenum content of 317 stainless steel is slightly higher than that of 316 stainless steel Due to the molybdenum in the steel, when the concentration is lower than 15% and higher than
Greenwich.The electroless plated Pd film on the surface is mainly composed of PD, P and O. it has excellent corrosion resistance in boiling dilute solution. The corrosion rate is 4 orders of magnitude lower than that of 316L stainless steel, and the corrosion rate is also significantly lower in A-B mixed acid. In the boiling solution containing halogens, when the concentration of halogens is very low
1. Surface defects of raw materials. Such as scratch, pitting, soaking, etc.
.The petrochemical industry, including the chemical fertilizer industry, has a great demand for stainless steel pipes. Stainless steel seamless pipes are mainly used in this industry. The specifications include 3032331634317l, etc. the outer diameter is about ￠ 18- ￠ 610, and the wall thickness is about 6mm-50mm (generally the selected specifications are
Iron oxide and spinel can also be oxidized by salt to become loose ferric oxide, the formed oxide is partially peeled off and settled at the bottom of the furnace in the form of sediment. Alkaline salt melting pretreatment process flow: steam oil removal → Preheating（
The competitiveness of stainless steel products, only in this way can we achieve an invincible position in foreign trade.
Its principle is different, and its scope of application is also different, but most of them are easy to install,GreenwichManufacturer of stainless steel bars, firm and reliable. Most of the sealing rings or gaskets used for connection are made of silicone rubber, nitrile rubber and EPDM that meet the requirements of national standards. 316L stainless steel pipes are provided for a long time
The main factors affecting the polishing performance are as follows: 1. Surface defects of raw materials. as
Accounting for 8-16% of the total steel, it is widely used in the national economy. Because the steel pipe has a hollow section, it is suitable for the transmission pipeline of gas and solid; At the same time compared with round steel of the same weight, the section coefficient of steel pipe is large and the bending resistance
Where is good.Section shape stainless steel pipe can be divided into round pipe and special-shaped pipe according to the section shape. Special shaped tubes include rectangular tubes, rhombic tubes, elliptical tubes, hexagonal tubes, octagonal tubes and various cross-section asymmetric tubes. Special-shaped pipe is widely used in various structural parts,Greenwich304 stainless steel seamless precision steel pipe, tools and mechanical parts. Compared with round pipe,
AUSTENITIC FERRITIC duplex stainless steel. It has the advantages of both austenitic and ferritic stainless steels and has superplasticity. Martensitic stainless steel. High strength,GreenwichAustenitic stainless steel strip, but poor plasticity and weldability.
Angular, octagonal and other special-shaped steel pipes.
Chemical reaction, protective film affected by
Free consultation.New stainless steel is being developed. Due to the continuous improvement of production efficiency and quality, stainless steel has become one of the cost-effective materials selected by architects.
Features: beautiful surface and diversified use possibilities; Good corrosion resistance; Longer and more durable than ordinary steel; Good corrosion resistance; High temperature oxidation resistance and high strength, so it can resist fire; Good plasticity and weldability. It has excellent rust resistance and intergranular corrosion resistance
Level, when the embrittlement temperature is improved in the range of -50 ℃ to -100 ℃ it may be used in freezing related projects. Recently, sus430lx (18cr Ti, Nb LC) and sus436l (etc.) have been applied to frozen shells. Ferritic stainless steels are body centered cubic junctions
Greenwich.In austenite and then rapidly cooled. Air cooling can be adopted for thin-walled parts, and the outside shall be sealed with adhesive cloth.