Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
The main lifting mast adopts high-strength profiles, intermediate shafts and bearings, oil cylinder pin shafts and bearings, boom hinge shafts and bearings, etc.
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of the elevator. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.
.Check the rollers, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Fill the above components with oil. The service life of bearings can also be greatly enhanced.
And different uses: single column electric elevators: This series of products is indoor and widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has balanced lifting and easy operation, and can enter general lobbies. It can enter and exit the elevator at will with low power consumption, no pollution, and does not harm the ground during work. It can be used for wall work and exploration work, without dead corners. The single column electric elevator, equipped with a gantry cross frame accessory, is very suitable for maintenance work in cinemas, auditoriums, etc. The gantry frame is easy to assemble, labor-saving to operate, flexible to move, capable of crossing obstacles such as fixed seats with a height of up to 1m, and can operate stably on steps. Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.
The elevator uses high-strength and high-quality profiles, which are sturdy, not easily deformed, and can effectively reduce deflection during lifting, and can support high-altitude operations to higher heights. This device can perform various operations in many fields and is widely used in factories, hotels, restaurants, stations, airports, cinemas, exhibition halls, and other places. It is a safe choice for maintenance equipment, painting decoration changing lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.
It is composed of several parts such as the base, column, crossbeam, safety protection components, and motor (power unit), and each system is complementary and indispensable. The increase of the lifting platform mast ensures the stability of the equipment at high altitude, ensures work safety reduces the amplitude of equipment shaking, and makes high-altitude operations more stable.
Three column elevator: Three sets of masts support the operation platform to lift and lower synchronously, with the same support structure as a single masted platform,TautaubanioManual hydraulic lifting platform, which has a super large load capacity and excellent working stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
A specially designed guide wheel device between masts ensures smooth and smooth lifting.
Installation requirements.The fault diagnosis equipment on the elevator can inform the operator of possible errors. The chassis is high and suitable for walking on rough surfaces. Planning is practical, reliable, four wheel drive, and steering. Free turning equipment. Urgent descent system. The operation height ranges from 4 meters to 22 meters, with advanced equipment and high-power power.
Summary: Elevators can be large or small, and regardless of size there should be no sense of luck during operation. It is necessary to establish correct safety awareness in order to ensure safety.
In modern society, there are many high-altitude work projects, and their danger is not only related to construction management and personnel quality, but also to the working environment and equipment used in construction. Therefore, high-altitude work equipment has received more and more attention, with continuous development and innovation in lifting and lowering, and has been trusted and used by customers.
Therefore, the use of stable voltage in elevators is crucial for safe operation. Elevators have high stability, a wide working platform, and a high load-bearing capacity, making high-altitude operations more efficient and safe. To avoid the harm of voltage instability, please ensure voltage stability.
Online consultation.And different uses: single column electric elevators: This series of products is indoor and widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has balanced lifting and easy operation, and can enter general lobbies. It can enter and exit the elevator at will with low power consumption, no pollution, without dead corners. The single column electric elevator, equipped with a gantry cross frame accessory, is very suitable for maintenance work in cinemas, auditoriums, etc. The gantry frame is easy to assemble, labor-saving to operate, capable of crossing obstacles such as fixed seats with a height of up to 1m, and can operate stably on steps. Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.
The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process, and at this position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the box. The hydraulic oil is darkened, sticky or has foreign objects such as gravel. If found, it should be replaced in a timely manner. Professional mobile elevator manufacturer with high prices, service, on-site settlement, and honest operation!
The garage door should be opened or the exhaust device should be opened. So that the exhaust gas can be stored in the garage at any time. Even if working outdoors. Also, do not stay near the exhaust pipe of the working engine for a long time.
Tautaubanio.The single column elevator, equipped with a gantry cross frame accessory, auditoriums, etc. The gantry frame is easy to assemble, labor-saving to operate, flexible to move, capable of crossing obstacles such as fixed seats with a height of up to 1m and can operate stably on steps.
The person in charge of the work should not only inspect the condition of the vehicle and the operators, but also be responsible for checking the terrain environment and whether the descent meets the requirements of safety technical measures or pre developed work plans. If there is any discrepancy, corresponding elevator measures should be formulated before starting work.
Single masted elevators are widely used in factories, hotels,TautaubanioElectric self hydraulic lifting platform, restaurants, cinemas exhibition halls, and other places. They are a good safety companion for maintaining equipment, painting and decorating, replacing lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.