OluFully elect
OluSmall electLow level doors should be equipped with interlocking devices that can verify their closed and locked positions. The action of this interlocking device should be at the entrance of the cage. Simple use should not interfere with the operation of the interlocking device. The attached wall bracket should use matching standard products. When the wall bracket cannot meet the requirements of the construction site, it should be designed separately. The design of the wall bracket should meet the requirements of component stiffness, strength,OluElectric screw elevator, stability,OluRechargeable electric elevator, etc., and the production should meet the design requirements.
The full height landing door should meet the following requirements: the net height of the landing door opening should not be less than 0m. In special circumstances, when the net height of the building entrance is less than 0m it is allowed to lower the height of the lower door opening, but in any case, the net height of the lower door opening is not less than 8m. (Article 1 of GB26557-2011)
Olu.The stopper bearing of the mechanism is kept intact.
Setting requirements: The layout and installation of all cables and wiring of electric elevators should be able to prevent mechanical damage.
.The landing door should be in a normally closed state. Without the permission of the construction electric elevator driver, the landing door shall not be opened.
Setting requirements: The landing door should be standardized and tooled.
During loading and unloading, the horizontal distance between the edge of the cage door and the edge of the landing station should not exceed 50mm.
The scaffolding of the parking platform should be laid tightly and firmly.
Before installing the construction electric elevator, the foundation should be inspected and approved before installation.
During normal operation, the horizontal distance between the closed cage door and the closed landing door should not exceed 150mm. Otherwise, measures should be taken to make it meet the requirements, or side protection devices at the entrance of the landing station that meet the requirements should be equipped. The distance between any opening between the side protection device and the hanging cage or landing door should not exceed 150mm.
reform.Low power consumption: When the hydraulic guide rail lifting platform descends, it is driven by the pressure generated by its own weight, greatly saving energy and reducing consumption.
The use of a lifting platform as a tool for storing performance blankets, soft scenery etc. In some theaters,Olu6m electric elevator, soft scenery, etc.
When the foundation is set on the roof or floor structure, the bearing capacity of its supporting structure should be checked.
Electric elevators used in various places.
quality.Setting requirements: For construction electric elevators that operate in multiple shifts, the handover system should be implemented, and the pressure gauge reads the value when observing the pressure gauge
Before installation, the installation unit should confirm that the foundation, foundation bearing capacity, embedded parts, and foundation drainage measures of the installed construction electric elevator and auxiliary heavy equipment comply with the requirements of the special construction plan for the installation and dismantling of the construction electric elevator based on the construction electric elevator foundation acceptance form, concealed engineering acceptance form, and concrete strength report.
Olu.When a rigid 5000mm2 square or circular flat surface is applied with a normal force of 600N to either side of the door, the door may not meet the above requirements, but safety should be maintained.
News Abstract: The development of the lifting platform industry will continue to grow in recent years! With the continuous development of electric lifting machinery for high-altitude operations in recent years, the products of electric lifting platform vehicles have been continuously improved, and various new technologies and materials have emerged, making the further development of lifting platform vehicles possible.
Setting requirements: The installation and dismantling workers, electricians, and other operators of construction electric elevators should have special construction operations.