Sivetohelovi ćThe cleaning of the elevator manufacturer requires that all parts of the elevator should be kept free of oil sludge, especially the air, fuel and oil filter of the engine should be checked and cleaned according to the specified time to prevent impurities from entering the cylinder and oil passage, so as to accelerate the wear of moving parts. Elevator manufacturers suggest developing some maintenance systems. The regular maintenance system is based on the wear and service life of mechanical components, which has also become the planned expected maintenance system.
This series of products has a load capacity of 0.1 to 0.8 tons, and can also be customized according to user requirements, with a load capacity of up to 10 tons.
Sivetohelovi ć.For some site lifting platforms protective railings are generally added above the platform. As lifting platforms are special equipment, the National Quality Inspection Bureau strictly inspects this area. Any lifting platforms that are deemed to have safety hazards must be removed. Therefore when asked if you want to add protective railings, do not blindly refuse. Consider whether it is necessary based on the site of use. And it is necessary to have two types of certificates, namely the 'Special Equipment Manufacturing License of the People's Republic of China' and the 'Special Equipment Installation, Transformation, and Maintenance License of the People's Republic of China', in order to produce, install, and maintain. Therefore, it is necessary to ask the manufacturer whether they have these two types of certificates.
During the use of hydraulic elevators, if not properly operated, there will always be problems. Many customers have reported that hydraulic elevators sometimes cannot be lifted. If the hydraulic lift pump can continue to work, other issues need to be considered. Below,Sivetohelovi ćConstruction site construction elevator, the editor will explain the reasons for the hydraulic lift pump station not being oiled and solve the reasons for the hydraulic lift pump station not being oiled, as well as the solutions for mobile elevators The analysis of the pump station of hydraulic elevators such as guide rail elevators is as follows: the motor power supply is abnormal or reversed; The solution is to correctly connect the motor power supply or adjust the steering mailbox to ensure there is no hydraulic oil or insufficient oil; The solution is to add hydraulic oil.
.Hydraulic lifting platforms can be divided into: four wheel mobile, car modification, car type, auxiliary self-propelled, and lifting heights ranging from a meter to 1 meter.
The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
The seat belt needs to be inspected every six months, with a load of 225 kilograms. The test time is five minutes. After the test, check whether the seat belt is broken or deformed, and keep records of the experiment. Any unqualified seat belts should be immediately stopped from use.
Nowadays, elevators are widely used and are involved in many industries. The spiral elevator is no exception and has a very good effect. But sometimes the surface of the spiral elevator will rust, which has a certain impact on work efficiency and needs to be removed. So what is the solution to the surface rust of the spiral elevator?
Now that you understand how to use a hydraulic lift, it provides us with a safe working environment for our operators, and improves the efficiency and quality of the lowering work.
Elevating platform price elevators and elevating platforms are used for large-scale high-altitude continuous operations such as airport terminals, aircraft repairs, stations, docks, sports venues, residential properties, factories and mining workshops. Some products have the function of active walking, allowing for fast and slow walking under different operating conditions. With just one person in the air, the machine can be operated to complete actions such as up and down, moving, retreat, and turning. When the machine is in a suspended state, the wheels are always in a braking state and can firmly brake on a 6 degree slope. The large diameter and ultra wide high-quality rubber wheels provide users with useful maintenance on the ground and increase the friction force during braking.
Workshop cost.The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
Purpose The hydraulic lift is widely used in various industrial enterprises and production lines such as automobile, container, mold manufacturing, wood processing, chemical filling, etc., to meet the lifting requirements of different operation heights, and can be equipped with various table forms (such as ball, turntable, steering, tipping, telescoping), and with various ways (separate, linkage, explosion-proof) it has the characteristics of stable and accurate lifting, frequent starting,Sivetohelovi ćElectric self-propelled elevator,Sivetohelovi ć2-story small household elevator, and large load capacity, Effectively solve various lifting and lowering difficulties in industrial enterprises, making production operations easy.
Aging and deterioration of hydraulic oil; The solution is to replace the hydraulic oil. A specialized product manufacturing enterprise that integrates research and development, as well as service. A long-term professional elevator manufacturer
The product has a sturdy structure, a large load-bearing capacity, smooth lifting, simple and convenient installation and maintenance, making it an ideal and economical cargo conveying equipment for replacing elevators between low floors. The editor will share with you some common knowledge about daily maintenance of outdoor elevators: When personnel enter the interior of the lifting platform for maintenance, they must hang the elevator to prevent sudden lowering of the platform and causing casualties.
Total quality management.Connect the motor naturally to the elevator. When connecting, it is necessary to ensure that the concentricity of the elevator output shaft and the motor input shaft is consistent, and the outer flanges of the two are parallel. Inconsistent alignment can lead to motor shaft breakage or elevator gear wear.
The anti-corrosion measures for the body of high-altitude work vehicles should pay attention to small scratches. The paint surface of high-altitude work vehicles often corrodes. In addition to common collisions, scratches, and small rocks on the driving tires, there can also be a peeling point which will cause a small rust over time. Because most of these scars are small and easily overlooked. Therefore, regular inspections should be conducted on the engine hood and surrounding areas. Once discovered it is necessary to promptly go to a professional beauty shop for processing.
Hydraulic lifting platforms are widely used in factory maintenance, municipal construction, and decoration of hotels in industrial and mining enterprises, with reliable quality and perfect performance.
Sivetohelovi ć.Drain all the hydraulic oil in the oil tank, open the oil tank, take out the oil suction filter, clean it, and return it to the oil tank. Install it in its original position. Fill the fuel tank with new oil.
The set pressure of the elevator price regulating valve is insufficient; The solution is to adjust the pressure valve. Professional elevator manufacturers have high pressure resistance, good waterproof performance, fire and high temperature resistance, strong overload capacity, corrosion resistance, radiation resistance, and long service life
The purpose of the hydraulic lifting platform allows users to choose the power mode and configuration according to their own usage range: the power system includes: DC power supply, single-phase or three-phase power supply, diesel engine.