BIVA podraskaInstallation of electric elevators for fire protectionWhat are the performance

According to the needs of different performance genres, the form of the stage can be changed. For example, using an orchestra pit lift can combine a framed stage with a large lip or even an extended stage. In an experimental theater, using a lift can make the theater have various forms such as an end stage, an extended stage, an island stage, an intermediate stage, or a hall.

In addition to ground protective fences, low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between 1m and 2m. And there should be at least protective railings, a half height middle crossbar, and a toe board at least 150mm above the ground.

BIVA podraska.Equal effect.

Double layer steel mesh: The diameter of the steel bars is 12mm, with a spacing of 200mm.

.Setting requirements: The landing door should be standardized and tooled.

The pump body adopts an integrated pump station, which can also be selected according to customer requirements to meet customer ideal requirements.

Safety performance: Electric elevators not only have the safety device of traditional traction elevators, but also have an overflow valve to prevent excessive system pressure during upward movement

The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.

Savings,BIVA podraskaBasement electric elevator, rate of increase and decrease. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to prevent hydraulic pipelines from exploding and self locking safely. Installed overloaded voice control alarm

Drivers of construction electric elevators should hold special construction operations and are not allowed to operate without a certificate.

Honesty and mutual benefit.It is understood that the scissor type lifting platform is a widely used specialized equipment for high-altitude operations. Its shear fork mechanical structure provides high stability for the lifting platform, wide working platform, and high load-bearing capacity, making the range of high-altitude operations larger and suitable for multiple people working simultaneously. The lifting power is divided into 24V,BIVA podraskaFloor electric elevator, 220V or 380V power supplies, using Italian and domestic hydraulic pump stations, and the table top is equipped with anti slip insulation buckle plates, which have anti slip, insulation, and safety features. Please rest assured to use.

Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.

The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.

The foundation base or embedded parts should be fully embedded in the concrete foundation plate.

Direct labor.The L distance depends on the selected wall mount model.

Construction electric elevators should be equipped with safety devices to prevent the cage from falling. The anti fall safety device should be functional at all times, including installation, disassembly,BIVA podraskaElectric cargo elevator, and before resetting after action. Fall arrest safety gear

Tank oil temperature protection: When the oil temperature in the tank exceeds the standard setting value, the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops

BIVA podraska.When the horizontal distance between the edge of the cage and the edge of the landing or between the cage and the landing door is greater than 150mm and there is no effective protection from other structures, the side protection device for the landing entrance should be equipped.

Secondly, for the replacement of hydraulic oil on the lifting platform, it is recommended to replace it every three months. If the frequency of use is not high, it can be replaced once a year. The hydraulic oil must be clean, and after changing the hydraulic oil it must be automatically lifted and lowered 2 to 3 times to ensure that the air in the oil cylinder is completely discharged, maintain sufficient space and ensure that the lifting platform can be lifted to the rated lifting height.

Construction electric elevators outside the lightning protection range