PesaroSmall elWhen operating the aluminum alloy lifting platform,PesaroFixed scissor lifting platform, these electrical appliances have a lot of protective work or are very important, and with the help of different layers of goods lifting, and the lifting is very smooth and smooth. So during the installation process, these lifting platforms can achieve higher work efficiency, and there will also be professional operators who can use them better during operation.
When using, the weight should be evenly distributed, mainly in the center of the countertop. However,PesaroHydraulic lifting platform fixed type, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
Pesaro.Of course, for electric lifting platforms, in addition to the above advantages in design, there are also many other advantages that are also very good. So many times, if there is a need for this aspect of use, you can try to choose this type of lifting equipment, after all, it has a lot of security in all aspects.
Heavy steel wire rope wheels or heavy-duty specialized chains ensure safety.
.One important reason why people widely use this software in industrial production processes. In order to transport products to designated locations in a timely manner people often use this device for operation during the transportation process, and this device also has excellent working stability.
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator, and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
Chain or wire rope breakage protection device.
The electric lifting platform needs to work under load according to the regulations on the nameplate during use but overloading is strictly prohibited during use. Especially in emergency situations, it can only briefly overload by 10%.
In addition to reducing production costs, electric lifting platforms are more flexible to use, and their motion inertia is relatively small, they can grasp workpieces close to the machine base. It is important to be able to intelligently operate the system during use, and can accurately complete the corresponding work, especially automation has become the theme.
The design of the product and some related situations are all very important. Moreover, many products come in different types. When choosing electric elevators, some professional companies can help people understand the situation of these products, learn about fixed and special products, and design them according to customer needs, To achieve better results, in the overall process of equipment design, people will have better choices for these lifting platforms, and also pay attention to some related performance characteristics and operational aspects, and pay attention to issues.
Highly recommended.When using a hydraulic lifting platform, there are many details that cannot be ignored. It mainly uses an external power supply so when operating, personnel need to master its operating knowledge, which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route, which is the basic content. So in addition, hydraulic lifting
Of course, the hydraulic lifting platform uses a dual protection structure, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized,PesaroElectric hydraulic lifting platform small, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
Any mechanical equipment has a certain working principle, and important components are very important when using a lifting platform. When making a selection, the lifting platform should be able to understand the specific working principle during use. When operating, it is formed by a vane pump with a certain pressure and can be operated through oil filter directional valves, throttle valves, etc, It can make its activity upward and lift heavy objects. During operation, and a pressure gauge can also be used to observe some information.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
The cheapest.The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
The noise generated during work is relatively small. Compared to some equipment with lifting functions, the rail type elevator generates less noise during operation, avoiding the impact of machine operation on hearing. It is suitable for enterprises that have requirements for environmental volume. If enterprises want to ensure normal hearing and ensure that the venue is not affected by noise, they should choose to purchase a guide rail type electric elevator.
Hydraulic system pressure loss explosion-proof protection device.
Pesaro.When there is a power outage, manual emergency descent can be used, which is safe, convenient, fast, and practical.
In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
These devices are also relatively easy to operate during use and should be able to achieve goals and requirements.