AjkaFixed elecThe downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve,AjkaElevator hydraulic fixed type, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, the home also attaches great importance to safety settings. Basically, this type of platform will have corresponding security settings during the application process, which means that the usage process will be very secure. In addition, the quality of the materials used is relatively high which also indicates from another perspective that this type of lifting platform is very safe and reliable in the application process.
When using hydraulic elevators, check the connections of each part during use and tighten them in a timely manner if there is any looseness. All connecting shafts require the use of split pins in order to ensure sufficient use and better utilization.
.When using a hydraulic lifting platform, personnel need to master its operating knowledge so when operating, which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route, which is the basic content. So in addition, hydraulic lifting
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
When using an electric lifting platform, there are many details that need to be noted, such as placing it on a flat surface during use to prevent tipping during work. In addition, what are the precautions for using electric lifting platforms?
In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
Firstly, elevators can be used in many construction projects and can be introduced into the high-altitude elevator industry. It is important to play a leading role in these industries, and it can reduce costs, making it very convenient to use. Simply put, this device is safer and more reliable during use. Due to the manual construction and production of steel pipe scaffolding, there are situations of non-standard or material wear during the design process of the structure. Local instability can also have some impacts, and inadequate protective measures can have a significant impact. Especially when there are significant safety hazards for items or personnel during the operation process, the use of mechanical adjustment structures can ensure that the lifting process can always maintain a horizontal state, which is also the advantage of using elevators. During use, it can be ensured that the lifting process can maintain a horizontal state and form a stable support structure, so the safety factor of the elevator during use is relatively high.
What is the difference between a self-propelled elevator and a self-propelled hydraulic elevator?
Recommendation and consultation.These devices are also relatively easy to operate during use and should be able to achieve goals and requirements.
When there is a power outage, manual emergency descent can be used, which is safe, convenient, fast, and practical.
The oil cylinder is built into the platform.
Heavy steel wire rope wheels or heavy-duty specialized chains ensure safety.
wholesaler.Hydraulic system pressure loss explosion-proof protection device.
In terms of load capacity, fixed lifting platforms are generally used to transport a large amount of goods, but due to the large quantity of goods, the total weight is relatively large. Although the load carrying capacity of fixed lifting platforms is relatively large, there are differences in the load carrying capacity between different lifting platforms. If a relatively small lifting platform is chosen, the task of transporting goods cannot be successfully completed. Before officially lifting the platform it is necessary to understand the cargo transportation volume, and then select the lifting platform based on the transportation volume. If you purchase without investigating the delivery volume, it is possible to purchase inappropriate equipment.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, dirt issues)
Ajka.When using equipment,AjkaFixed platform elevator,AjkaHousehold fixed lifting platform, people will consider different information and situations, and reference them based on these elements. Therefore, when using electric elevators, it can bring better work efficiency to people, and also enable them to achieve certain efficiency during the use process. Many manufacturers can cooperate with some very professional companies when designing products. Because material selection also meets strict requirements and standards, it can provide customers with better quality choices when designing products.
The similarities between both are self-propelled machinery, while the latter is hydraulically driven, while the former may be directly driven by electricity or an internal combustion engine.
Heavy steel wire rope wheels or heavy-duty specialized chains ensure safety.