XinleSmall eleRefueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Mobile lifting platforms are divided into: four wheel mobile lifting platforms, two wheel traction lifting platforms,XinleFixed small lifting platform, modified car lifting platforms, hand push lifting platforms, hand operated lifting platforms, AC/DC dual purpose lifting platforms, car mounted lifting platforms,XinleFixed elevator cargo elevator, self-propelled lifting platforms, diesel engine curved arm self lifting platforms, folding arm lifting platforms, and aluminum alloy lifting platforms.
Xinle.In campus, various physical protective equipment needs to be installed. In this case, hydraulic elevators are needed to enhance the safety awareness of the campus. What are the advantages of using hydraulic elevators on campus?
Having a better understanding of the way to close the switch or the situation in each automatic design aspect can improve efficiency and pay attention to these different information when using them.
.Of course, the hydraulic lifting platform uses a dual protection structure, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
Mobile lifting platforms are divided into: four wheel mobile lifting platforms, two wheel traction lifting platforms modified car lifting platforms, hand push lifting platforms, hand operated lifting platforms, AC/DC dual purpose lifting platforms, car mounted lifting platforms, self-propelled lifting platforms, diesel engine curved arm self lifting platforms, folding arm lifting platforms, sleeve type lifting platforms, and aluminum alloy lifting platforms.
If hydraulic elevators are used on campus, it can better enhance the safety and security of the campus. For campuses, especially after school every day, there are a large number of parents and there are also safety hazards such as people and cars. Maintaining order in such situations is a good idea.
The hydraulic lifting platforms used in different industries are different, so when making a selection it is necessary to choose based on its model and also according to the working environment. So what are the characteristics of hydraulic lifting platforms?
Quality improvement.The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
When using equipment, people will consider different information and situations, and reference them based on these elements. Therefore, when using electric elevators, it can bring better work efficiency to people, and also enable them to achieve certain efficiency during the use process. Many manufacturers can cooperate with some very professional companies when designing products. Because material selection also meets strict requirements and standards, it can provide customers with better quality choices when designing products.
The electric lifting platform needs to work under load according to the regulations on the nameplate during use, but overloading is strictly prohibited during use. Especially in emergency situations, it can only briefly overload by 10%.
Car mounted curved arm elevator: Install the curved arm elevator on a car and use car power to drive the lifting. Suitable for long-distance outdoor high-altitude operations.
Honest service.The electric lifting platform needs to work under load according to the regulations on the nameplate during use, but overloading is strictly prohibited during use. Especially in emergency situations,Xinle4 ton fixed lifting platform, it can only briefly overload by 10%.
For manufacturers specializing in the production and manufacturing of lifting equipment, there are many types of materials that can be used in daily production and manufacturing processes. The equipment produced will vary depending on the materials used. During the production of aluminum alloy elevators, the materials used by the manufacturers are very high-strength aluminum alloy materials, which also makes
Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; LOGO” Program adjustment of time delay to avoid frequent motor movements affecting service life.
Xinle.The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, a hydraulic control one-way valve, also known as a hydraulic lock is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator, and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
Everyone knows that many industries use hydraulic elevators, and when using them, it is necessary to ensure the stability of the machine. If the machine is unstable, it will have a significant impact during use. So what details cannot be ignored during the use of hydraulic elevators?