AmesfordFully automatic high-altitude reclaimerProduct performance and failure

announcer:hp938HP166090698 release time:2024-02-26 09:13:06

but automatically resumes operation after a few minutes: The elevator (escalator) has been running for too long, and the motor overheats. To prevent burning out, the motor cools down and automatically resumes operation.

Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway

Amesford.The treatment of general civil engineering problems on escalator sites: the beam edge distance is too large: in this case, the length of the upper and lower platforms of the escalator can be increased to meet the actual dimensions of civil engineering. One platform can be extended on one side or both platforms can be extended simultaneously. The total extension of the upper and lower platforms should generally not exceed 1000mm. When lengthening the platform, attention should be paid to the length of the pit or the opening of the floor slab, which should also be lengthened at the same time. After the escalator is extended the force on the upper and lower support points will also increase. If the edge distance of the beam increases too long, support needs to be added in the middle of the escalator truss. In addition, changing the angle of the escalator from 35 degrees to 30 degrees can also make the beam edge distance longer.

The gantry elevator is used in the door legs of large gantry cranes to transport workers and maintenance components inside the gantry crane

.These phenomena are not elevator malfunctions. When the elevator is fully loaded, the elevator does not stop: to avoid overloading, the elevator car no longer responds to the next station's outbound call.

Household elevators have gradually become an essential vertical transportation tool for modern single family, duplex, multi story, villa and other residential buildings, practical and convenient, and even a beautiful scenery in the home.

2. Different types of civil engineering traction elevators, screw elevators, and hydraulic elevators have different requirements for civil engineering. Common traction elevators require a certain amount of hoistway space, which can be made of concrete, and glass curtain walls to create sightseeing elevators; The depth of the pit should be at least 50cm or more; Additionally, there are certain requirements for the height of the top floor.


AmesfordFully automatic high-altitude reclaimerProduct performance and failure



As elevator people, let's talk about elevator and elevator safety knowledge: The elevators we currently use include box type passenger elevators, escalators and dedicated cargo elevators. Dedicated cargo elevators are installed due to special needs, and we don't use many of them. Now, let's take a look at the safety knowledge of box type passenger elevators and escalators: When we take escalators, Be sure to follow the safety instructions when riding on the elevator. Do not crowd or play around, hold onto the elevator firmly, fasten your shoelaces, and avoid getting them caught up.

The beam edge distance is too small: The method of shortening the lower platform is to shorten the total length of the escalator, generally not exceeding 200mm. Generally the platform cannot be shortened because it contains equipment such as cabinets and motors. Change the angle of the escalator from 30 degrees to 35 degrees

The gantry elevator is used in the door legs of large gantry cranes to transport workers and maintenance components inside the gantry crane

analysis.Overloaded elevators do not operate: The load of elevators is limited, and if they are overweight, they will alarm and generally cannot be started. Most passengers can also voluntarily exit.

Overloaded elevators do not operate: The load of elevators is limited, and if they are overweight,AmesfordAccessible lifting platform, they will alarm and generally cannot be started. Most passengers can also voluntarily exit.

Household elevators must be regularly maintained to confirm their safety and whether they can continue to operate, while also repairing any faults and hidden dangers found.


AmesfordFully automatic high-altitude reclaimerProduct performance and failure



2. Different types of civil engineering traction elevators, screw elevators, and hydraulic elevators have different requirements for civil engineering. Common traction elevators require a certain amount of hoistway space, which can be made of concrete, steel structure hoistways, and glass curtain walls to create sightseeing elevators; The depth of the pit should be at least 50cm or more; Additionally, there are certain requirements for the height of the top floor.

Variable cost.Mine elevators are used for transporting personnel and goods in mines. Special elevators are designed for special environmental conditions,AmesfordHousehold outdoor elevator on the third floor, such as explosion-proof, anti-corrosion, and heat-resistant elevators

The new technology of frequency regulation and voltage regulation (VVVF), abbreviated as Variable Voltage Variable Frequency in English, is based on the principles of electrical engineering. The speed and torque of the motor are directly proportional to the frequency and voltage amplitude of the AC power supply, achieving accurate speed regulation and control of the motor. This speed regulation technology ensures smooth elevator operation, and flexibility.

When encountering abnormal elevator operation, you can call the repair hotline to consult with the maintenance personnel or inform the service center to handle it. Do not take unauthorized measures to avoid causing greater harm to the elevator or even causing casualties.

Amesford.These phenomena are not elevator malfunctions. When the elevator is fully loaded, the elevator does not stop: to avoid overloading, the elevator car no longer responds to the next station's outbound call.

These phenomena are not elevator malfunctions. When the elevator is fully loaded, the elevator does not stop: to avoid overloading,AmesfordGrain hydraulic flipper, the elevator car no longer responds to the next station's outbound call.

There are many similar situations in daily life, such as forcefully opening the door inside the car, causing the circuit to disconnect and forcing the elevator to stop, resulting in people being trapped. For example, if the elevator frequently enters and exits during decoration and falls into the crack of the door, the elevator hall door may not be tightly closed, and after several consecutive doors are opened and closed, the elevator will stop. Professional quality assurance for home elevator manufacturers. Discount activities are underway, and new and old customers are welcome to come for consultation