SalsalsallePri
SalsalsalleEleThe curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position, it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Salsalsalle.With the continuous upgrading of technology, the technology of elevators on the market is also constantly developing. Therefore, forklifts that are safer and more convenient to use are widely used in foreign countries, but they were introduced relatively late in China. However, which can cross obstacles for high-altitude operations. When the platform is lifted to any position, it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset,SalsalsalleFixed hydraulic lifting platform, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
.Especially when its pipes are in use, they are quite boring and can roll, so in this case they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms, it is not allowed to carry people during use, it is equipped with railings or anti crack valves which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
What is the difference between a self-propelled elevator and a self-propelled hydraulic elevator?
Suitable for various rugged terrain in the wild, mainly used for construction with a wide range of spatial operations, bridge construction ship manufacturing, airports, mines, port terminals, communication and power facilities construction, and outdoor advertising engineering machinery equipment.
When operating the aluminum alloy lifting platform, and with the help of different layers of goods lifting, they should be able to meet certain requirements. The structure of each product is very large and the load-bearing capacity is also very large, and the lifting is very smooth and smooth. So during the installation process, these lifting platforms can achieve higher work efficiency, and there will also be professional operators who can use them better during operation.
At present, high-quality electric elevators on the market generally use lithium batteries during use. If they are charged quickly, the battery life will be longer. On the contrary, if non lithium batteries are used, work efficiency cannot be guaranteed during operation. Many fields choose electric elevators in the transportation process because it saves a lot of manpower and labor. If manual handling is carried out, it not only takes time and effort, but also has a relatively high labor cost. On the contrary, if electric elevators are used, it can improve efficiency and, importantly, reduce the risk of accidents.
Especially when its pipes are in use, they are quite boring and can roll, so in this case, they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms it is not allowed to carry people during use, it is equipped with railings or anti crack valves, which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
supply.The above detailed introduction, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators, and these details cannot be ignored during the use process.
What is the difference between a self-propelled elevator and a self-propelled hydraulic elevator?
Chain or wire rope breakage protection device.
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator, and then you can smoothly open the door. Of course, some small and narrow channels are also possible,SalsalsalleSmall lifting mobile platform, so we need to pay attention to this point.
Pursuit of excellence.The working principle of the elevator is that hydraulic oil forms a certain pressure through a vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil from the upper end of the hydraulic cylinder returns to the oil tank through an explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
Basically electric lifting platforms are commonly used in many industries, as they are necessary for the movement and transportation of goods. In fact, there are many types of lifting platforms in the market, and the reason why people are willing to choose this type is closely related to some of its characteristics. And these characteristics are usually reflected in the following aspects.
Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators mast hydraulic elevators,SalsalsalleSmall fixed lifting platform, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, municipal gardens, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, self-propelled walking, electric starting, self supporting legs, simple operation, and especially the ability to cross obstacles for high-altitude operations.
Salsalsalle.Suitable for various rugged terrain in the wild, with a wide range of spatial operations, mainly used for construction, bridge construction, ship manufacturing, airports, mines, port terminals, communication and power facilities construction, and outdoor advertising engineering machinery equipment.
The hydraulic lifting platforms used in different industries are different, so when making a selection, it is necessary to choose based on its model and also according to the working environment. So what are the characteristics of hydraulic lifting platforms?
Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, self-propelled walking, electric starting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.