MeretzFixed hiThe fixed lifting platform has a very obvious advantage over other types of work platforms, which is that the work intensity is very high. After carrying out high-intensity work, people often use fixed lifting platforms for operation.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, installation issues, dirt issues)
Meretz.The above detailed introduction, these details cannot be ignored, and when making purchases,MeretzScissor fork small lifting platform, it is necessary to choose according to personal needs.
Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
.The working principle of the elevator is that hydraulic oil forms a certain pressure through a vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil from the upper end of the hydraulic cylinder returns to the oil tank through an explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, but it is necessary to connect the ground wire during use. Of course, check the connections of each part during use and tighten them in a timely manner if there is any looseness. All connecting shafts require the use of split pins in order to ensure sufficient use and better utilization.
The design of the product and some related situations are all very important. Moreover, learning about these automated information and systems through different channels and channels can help one make the right choices. In fact, many products come in different types. When choosing electric elevators, some professional companies can help people understand the situation of these products, learn about fixed and special products and design them according to customer needs, To achieve better results, in the overall process of equipment design, people will have better choices for these lifting platforms, and also pay attention to some related performance characteristics and operational aspects, and pay attention to issues.
Due to the above three advantages of rail type electric elevators, more and more enterprises are purchasing such lifting equipment. During the use of elevators, many enterprises have spent funds on maintenance. However, the maintenance of such equipment is simple and requires less funds, making it suitable for enterprises with ordinary financial conditions.
Mobile lifting platforms are divided into: four wheel mobile lifting platforms, two wheel traction lifting platforms, modified car lifting platforms, hand push lifting platforms, hand operated lifting platforms, AC/DC dual purpose lifting platforms, car mounted lifting platforms, self-propelled lifting platforms, diesel engine curved arm self lifting platforms, folding arm lifting platforms, sleeve type lifting platforms, and aluminum alloy lifting platforms.
plan.Fixed lifting platforms are widely used in many industrial fields, and their work efficiency is very high during use, which can greatly save people's work time and improve work efficiency.
And connectors. Beautiful appearance, easy operation, wiring harness connected using connectors, with automatic and manual options.
Especially when its pipes are in use, they are quite boring and can roll, so in this case, they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms it is not allowed to carry people during use, and it is strictly prohibited to carry people. If the electric lifting platform carries people during use, it is equipped with railings or anti crack valves, which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
The hydraulic lifting platforms used in different industries are different, so when making a selection it is necessary to choose based on its model and also according to the working environment. So what are the characteristics of hydraulic lifting platforms?
Equipment maintenance.The functions of electric cargo elevators are very diverse, and many equipment designs are very complex. If ideal delivery requirements can be achieved during operation, the sealing conditions, specific critical states, and information need to be taken seriously. It is also crucial to understand the safety performance of these operations,MeretzSmall hydraulic platform lift truck, Some security information is also very important, and it is important to pay attention to the characteristics of performance.
In short, there are many things to pay attention to when using electric lifting platforms in daily life, but the above two aspects will be more prominent because they directly affect the actual use of the platform. So special attention needs to be paid during daily use.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Meretz.The above detailed introduction, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators, and these details cannot be ignored during the use process.
The pump station adopts a joint venture pump station and an Italian imported pump station. If the speed requirement is too high, a joint venture customized pump station is used to meet the ideal delivery requirements. The oil cylinder and sealing components of the lifting platform lifting cargo elevator guide rail type lifting platform use imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.
Select the elevator dedicated leveling permanent magnet switch, which has a good leveling effect.