mono Scissor fWhat are the applicable ranges of guide rail hydraulic lifting platforms?
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
mono .For manufacturers specializing in the production and manufacturing of lifting equipment, there are many types of materials that can be used in daily production and manufacturing processes. The equipment produced will vary depending on the materials used. During the production of aluminum alloy elevators, the materials used by the manufacturers are very high-strength aluminum alloy materials, which also makes
Diesel curved arm elevator: It does not require external power supply and is suitable for outdoor high-altitude installation work. It uses diesel power to drive walking and lifting, with high power and fast walking speed.
.The curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
Hydraulic system pressure loss explosion-proof protection device.
When using an electric lifting platform, there are many details that need to be noted, such as placing it on a flat surface during use to prevent tipping during work. In addition, what are the precautions for using electric lifting platforms?
When operating the aluminum alloy lifting platform, these electrical appliances have a lot of protective work or are very important, they should be able to meet certain requirements. The structure of each product is very large and the load-bearing capacity is also very large, and the lifting is very smooth and smooth. So during the installation process, these lifting platforms can achieve higher work efficiency,mono Small manual hydraulic lifting platform, and there will also be professional operators who can use them better during operation.
The correct operation method for details. Regardless of the type of lifting equipment used, the correct operating method should be adopted during use. Because the correct operation method not only ensures the effectiveness of use, but also provides excellent safety performance. So many times, in order to get good use it is also important to choose the correct operating method. In general, when using an electric lifting platform, the manufacturer will also provide certain instructions in this regard, which means that as long as appropriate attention is paid it is sufficient.
The functions of electric cargo elevators are very diverse, the sealing conditions, specific critical states, and information need to be taken seriously. It is also crucial to understand the safety performance of these operations,mono Fixed lifting platform enterprise, Some security information is also very important, and it is important to pay attention to the characteristics of performance.
Standard requirements.When using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
The selection of equipment should consider the specific environment. Electric cargo elevators are a type of heavy lifting mechanical equipment that can be used for transporting goods with the help of high-rise buildings. When selecting products, they can be used for transporting goods between various working floors, especially in some underground warehouses or other production work. The use of automatic cargo elevators in workshops is very important, and when in use, Its safety device settings are very good, which can achieve good operation and better performance.
One important reason why people widely use this software in industrial production processes. In order to transport products to designated locations in a timely manner, people often use this device for operation during the transportation process, and this device also has excellent working stability.
When operating the aluminum alloy lifting platform, these electrical appliances have a lot of protective work or are very important, and with the help of different layers of goods lifting, they should be able to meet certain requirements. The structure of each product is very large and the load-bearing capacity is also very large, and the lifting is very smooth and smooth. So during the installation process, these lifting platforms can achieve higher work efficiency, and there will also be professional operators who can use them better during operation.
quality.The working principle of the elevator is that hydraulic oil forms a certain pressure through a vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil from the upper end of the hydraulic cylinder returns to the oil tank through an explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
Everyone knows that campus security is very important because it directly affects thousands of households. Therefore, in order to protect the future of our country, it is strictly prohibited to carry people during use. At the same time,mono Small electric lifting platform, attention should be paid during use to prevent damage to hands, feet, and clothing.
mono .Suitable for 2-3 story steel structures or concrete workshops, both internal and external.
The function of an automatic cargo elevator is that the use of an electric cargo elevator can be very stable, without any noise, and maintenance is also very convenient. The service life is also very long. In order to achieve safer results during use and operation some relevant information or components should be able to achieve
Suitable for 2-3 story steel structures or concrete workshops, both internal and external.