LeshnoMobile s
LeshnoFixed liWhat are the applicable ranges of guide rail hydraulic lifting platforms?
Everyone knows that many industries use hydraulic elevators, and when using them, it is necessary to ensure the stability of the machine. If the machine is unstable, it will have a significant impact during use. So, what details cannot be ignored during the use of hydraulic elevators?
Leshno.At the same time, the elevator can work efficiently during use, such as on a 50 meter or 10 meter high workbench. If traditional methods are used, this work will take a relatively long time. However, using the elevator can continuously adjust the structure and reinforce it during movement, which can improve work efficiency and complete this work in a short time, It can be seen that elevators have many advantages during use.
Trailer curved arm elevator: can be hung on a car, synchronized with the car, suitable for outdoor high-altitude operations. Lifting method: It is not convenient to use the power supply, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load so this detail needs to be noted during use.
When using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
When using the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
Everyone knows that many industries use hydraulic elevators, and when using them,LeshnoHow much is a simple small elevator, it is necessary to ensure the stability of the machine. If the machine is unstable, it will have a significant impact during use. So, what details cannot be ignored during the use of hydraulic elevators?
The skeleton sealing member belongs to the key component on the elevator, between the sealing hydraulic cylinder and the cylinder liner. If there is a problem with this component, the sealing hydraulic cylinder and cylinder liner may also be affected, which may affect the normal operation of the entire elevator and reduce the efficiency of logistics work. Therefore, attention must be paid to the inspection and maintenance of this component to maintain its quality at a certain level.
In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
Superior quality.Select the elevator dedicated leveling permanent magnet switch, which has a good leveling effect.
In the process of understanding, the selection of lifting platforms has strong flexibility to a certain extent. When conducting procurement, people should pay attention to these situations and contents, as well as some core influencing factors and situations. If there are other considerations when using these equipment, people can better use them for equipment selection and use. The selection of lifting platforms should take into account these specific usage situations.
Especially when its pipes are in use, they are quite boring and can roll, so in this case, they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms, it is not allowed to carry people during use, and it is strictly prohibited to carry people. If the electric lifting platform carries people during use, it is equipped with railings or anti crack valves which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
When using, mainly in the center of the countertop. However, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
Word of mouth recommendation.The electric lifting platform needs to work under load according to the regulations on the nameplate during use, but overloading is strictly prohibited during use. Especially in emergency situations, it can only briefly overload by 10%.
Everyone knows that in the manufacturing industry, a large amount of labor is required, and this industry faces significant employment pressure. Therefore, the use of electric lifting platforms can replace manual labor, which is also the main solution to this problem. The use of this equipment can greatly save production costs,LeshnoSmall 12 meter mobile elevator, making it more convenient to use. So why can electric lifting platforms be widely used in the industrial field?
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Leshno.The purpose of the curved arm elevator: The curved arm high-altitude work vehicle is widely used for installation, maintenance, and climbing operations in industries such as municipal engineering, electricity, street lighting, advertising, communication, transportation, docks, airports and ports,LeshnoSmall mobile lifting platform, and large industrial and mining enterprises.
Diesel curved arm elevator: It does not require external power supply and is suitable for outdoor high-altitude installation work. It uses diesel power to drive walking and lifting, with high power and fast walking speed.
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.