Qi geqiSmall hand operated lifting platformWhat is it made of

and the oil inlet filter is blocked. Add enough oil

Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues dirt issues)

For lifting platforms without manned protection, it is strictly prohibited to carry people during use. At the same time, attention should be paid during use to prevent damage to hands feet, and clothing.

Qi geqi.More prominent. However, many times there are many details that need to be paid attention to during the use process, after all, this is the only way to further ensure the effectiveness of the use. The details that need to be noted in the correct situation will include these aspects.

Suitable for 2-3 story steel structures or concrete workshops, both internal and external.

.The top floor height is not affected and can be customized according to the on-site environment.

Diesel curved arm elevator: It does not require external power supply and is suitable for outdoor high-altitude installation work. It uses diesel power to drive walking and lifting, with high power and fast walking speed.

During the operation of electric elevators, it is crucial for people to be able to understand the characteristics and situations of other precautions. Many technical personnel also need to combine other platform issues and contents to determine when operating, so that the transportation and use of these lifting platforms and goods can achieve better results and protection.

In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.

So, what aspects should be paid attention to when selecting a fixed lifting platform?

Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)

Quality inspection report.When using a hydraulic lifting platform, there are many details that cannot be ignored. It mainly uses an external power supply, so when operating, personnel need to master its operating knowledge, which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route, which is the basic content. So in addition, hydraulic lifting

It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use, so as to facilitate its use.

It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks,Qi geqiFixed lifting platform, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, self-propelled walking, electric starting,Qi geqiFixed cargo elevator lifting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.

assets.When operating the aluminum alloy lifting platform, these electrical appliances have a lot of protective work or are very important, and with the help of different layers of goods lifting, they should be able to meet certain requirements. The structure of each product is very large and the load-bearing capacity is also very large, and the lifting is very smooth and smooth. So during the installation process, these lifting platforms can achieve higher work efficiency, and there will also be professional operators who can use them better during operation.

Fixed lifting platforms with strong load carrying capacity usually occupy more space. If a company needs to use a lifting platform with a large load capacity and the space in the workshop is relatively small, it is good to adjust the layout of the workshop to make it more compact and place more equipment. When selecting a lifting platform, a company should not only focus on its occupied space and load capacity, but also pay attention to its price. If the price is too high, forcing it may affect the company's cash flow and be detrimental to the company's operations.

When using an electric lifting platform,Qi geqiSmall mobile lifting platform, there are many details that need to be noted, such as placing it on a flat surface during use to prevent tipping during work. In addition, which can greatly save people's work time and improve work efficiency.

What is the difference between a self-propelled elevator and a self-propelled hydraulic elevator?

Hydraulic system pressure loss explosion-proof protection device.