WehrovoSmall h
WehrovoSmall eWhen using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
The hydraulic lifting platforms used in different industries are different, so when making a selection, it is necessary to choose based on its model and also according to the working environment. So what are the characteristics of hydraulic lifting platforms?
Wehrovo.According to mobility, it is divided into fixed lifting platforms and mobile lifting platforms. Compared to the latter, the former has poor mobility and cannot be moved anytime, anywhere. If you want to move, you must use special tools to lift the fixed lifting platform and then place it elsewhere. Despite its poor mobility, its reliability is strong, so many companies have chosen this device.
In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
.Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, municipal gardens, grain depots,WehrovoFixed lifting platform enterprise, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, self-propelled walking, electric starting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.
When there is a power outage, manual emergency descent can be used, convenient, fast, and practical.
The pump station adopts a joint venture pump station and an Italian imported pump station. If the speed requirement is too high, a joint venture customized pump station is used to meet the ideal delivery requirements. The oil cylinder and sealing components of the lifting platform lifting cargo elevator guide rail type lifting platform use imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.
Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
The design of power units is good. Most power units of guide rail type electric elevators have good design, allowing the durability of the tension chain to be at a high level, ensuring the balance of materials during transportation, and preventing materials from falling off the table. In addition, it also brings stronger pump station power to the elevator, and can be adjusted according to the actual situation of material transportation, ensuring the efficiency of material transportation.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Analysis project.Diesel curved arm elevator: It does not require external power supply and is suitable for outdoor high-altitude installation work. It uses diesel power to drive walking and lifting, with high power and fast walking speed.
The curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position, it can operate while walking with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
When using a hydraulic lifting platform,WehrovoElectric hydraulic lifting platform small, there are many details that cannot be ignored. It mainly uses an external power supply, so when operating, personnel need to master its operating knowledge, which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route, which is the basic content. So in addition, hydraulic lifting
Trailer curved arm elevator: can be hung on a car, synchronized with the car, suitable for outdoor high-altitude operations. Lifting method: It is not convenient to use the power supply, but it can be driven for lifting. Beautiful appearance and convenient walking.
Create brilliance.Mobile lifting platforms are divided into: four wheel mobile lifting platforms, two wheel traction lifting platforms, modified car lifting platforms hand push lifting platforms, hand operated lifting platforms, AC/DC dual purpose lifting platforms, car mounted lifting platforms, self-propelled lifting platforms, diesel engine curved arm self lifting platforms, folding arm lifting platforms, sleeve type lifting platforms,WehrovoHydraulic fixed lifting platform, and aluminum alloy lifting platforms.
Especially now many villas are equipped with electric lifting platforms, and the technology of domestically produced equipment is constantly updated, which has a certain price advantage. Generally, a comfortable household lift can be obtained for use with 20000 to 30000 yuan.
Suitable for 2-3 story steel structures or concrete workshops, both internal and external.
Wehrovo.The oil quality brand lifting platform is a multifunctional heavy loading and unloading mechanical equipment, guide rail type, and curved arm type. Fixed types include scissor fork type lifting cargo elevators, loading and unloading platforms, and attached electric construction platforms.
Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, municipal gardens, grain depots, cleaning companies public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight self-propelled walking, electric starting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.
The working principle of the elevator is that hydraulic oil forms a certain pressure through a vane pump, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil from the upper end of the hydraulic cylinder returns to the oil tank through an explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.