Baylor Asha roonWarehouse electric elevatorHow to measure good or bad

the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops

Baylor Asha roon.There is a certain itinerary.

Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.

.Setting requirements: The wall bracket should use the manufacturer's matching standard products.

The L distance depends on the selected wall mount model.

The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements

The spacing between wall brackets and the height of guide rails above the high attachment point should comply with the requirements of the user manual.

Tank oil temperature protection: When the oil temperature in the tank exceeds the standard setting value, otherwise protective measures shall be taken.

Principle of electric elevator rotary valve: When the electric elevator rises, the rotary valve will automatically open. To close the plug valve, it is necessary to first turn the handle to turn the plug to a 90 degree position until it is closed, and then turn the transmission handwheel to lower the plug and achieve sealing.

Correct use can also greatly improve work efficiency. So how should it be used?

Drainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).

Latest consultation.When applying a normal force of 300N to any position on either side of the door using a rigid 5000mm2 square or circular flat surface in the locked position of the landing door, the door should be able to withstand and have no deformation; - Deformation not exceeding 30mm; After the test, it worked normally.

Chain type electric lifting mechanism: With a good guiding mechanism, it can ensure that the equipment does not tilt during operation. Gear and rack electric lifting mechanism: precise transmission and high cost.

The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve,Baylor Asha roonElectric boom elevator, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve,Baylor Asha roonSelf propelled electric elevator, hydraulic control one-way valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed.

Drivers of construction electric elevators should hold special construction operations and are not allowed to operate without a certificate.

Good reputation.Low power consumption: When the hydraulic guide rail lifting platform descends, it is driven by the pressure generated by its own weight greatly saving energy and reducing consumption.

Do not move after lifting, and do not lift until the four legs are firmly supported.

Speed limit wire rope switch. When the speed limit wire rope trips or breaks. Make the electric elevator unable to start.

Baylor Asha roon.Civil engineering advantages: The pit depth of the guide rail type lifting platform is generally around 150-300mm, and the top layer is not affected. It can be customized according to the location and environment.

Low power consumption: When the hydraulic guide rail lifting platform descends,Baylor Asha roonDecoration electric elevator, greatly saving energy and reducing consumption.

When applying a normal force of 300N to any position on either side of the door using a rigid 5000mm2 square or circular flat surface in the locked position of the landing door, the door should be able to withstand and have no deformation; - Deformation not exceeding 30mm; After the test, it worked normally.