TanobjegElectr
TanobjegFour wSetting requirements: Before starting work every day and changing shifts,TanobjegElectric four-wheel elevator, the driver of the construction electric elevator should inspect the construction electric elevator according to the requirements of the user manual and specifications, record the inspection results, and report any problems found to the user unit.
The bearing capacity of the ground under the concrete foundation plate should be greater than 0.15Mpa.
Tanobjeg.After the limit switch is activated, only professional personnel can restore the movement of the suspension cage; Limit switches and travel switches should not share the same triggering element; Limit switches should be either suspended or
Then, the lifting platform platform platform that carries the load needs to be balanced, and the lifting of goods should try to maintain a stable and uniform speed.
.The L distance depends on the selected wall mount model.
Double layer steel mesh: The diameter of the steel bars is 12mm, with a spacing of 200mm.
Then, the lifting platform platform platform that carries the load needs to be balanced,Tanobjeg8 meter electric elevator, and no deviation of one side is allowed. The lifting of goods does not allow people to stand on both sides of the platform, and the lifting of goods should try to maintain a stable and uniform speed.
It is reported that a fixed electric elevator has good lifting stability and can only be used for fixed operations, making high-altitude operations easier
Greater than 0.04s; When the hydraulic buffer is used, the oil level shall be checked, and the action of the hydraulic buffer shall be monitored by the Electrical safety switch. When the hydraulic buffer is compressed, the cage shall not
Drainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).
Affordable price.Setting requirements: The foundation and foundation of the construction electric elevator should meet the requirements of the user manual. Before installing the construction electric elevator, the foundation should be inspected and accepted according to the requirements of the specifications. Only after passing the inspection can the installation be carried out.
The bearing capacity of the ground under the concrete foundation plate should be greater than 0.15Mpa.
When the door is closed, except for the gap between the lower part of the door that should not exceed 35mm, any through-hole and opening size related to the distance between any door and adjacent moving parts, as well as the gap around the door or the gap between parts, should comply with the provisions of Table 4 of GB 23821-2009.
Electric elevators used in various places.
Scheme customization.Setting requirements: For construction electric elevators that operate in multiple shifts, the handover system should be implemented, and drivers should fill out the handover record form according to the standard requirements. The driver should conduct a pre shift inspection and confirm that there are no errors before starting the machine for operation.
Construction electric elevators should be equipped with lower limit switches that are sensitive and reliable.
Then, the lifting platform platform platform that carries the load needs to be balanced, and the lifting of goods should try to maintain a stable and uniform speed.
Tanobjeg.Setting requirements: The installation and dismantling workers, electricians, and other operators of construction electric elevators should have special construction operations.
Mechanical devices controlled by cage movement should not be used to open or close the landing door.
The use of a lifting platform as a tool for storing performance blankets,Tanobjeg2 meter micro electric lifting platform, soft scenery etc. In some theaters, soft scenery there is a soft scenery storage lifting platform located at an appropriate location on the stage for the storage of blankets, etc.