Emergency manual valve: In case of power failure, and the top layer is not affected. It can be customized according to the location and environment.
Belskbiava.When adding hydraulic oil, we can extend the oil cylinder to the high position for filling. When filling, the lifting platform should not exceed the high position, and then retract the oil cylinder back to the low position to check if the hydraulic oil level is lower than the low position, and maintain it between the two.
Work is essential, and the main protective accessories include safety belts,Belskbiava200 kg portable electric elevator, guardrails, protective covers, platforms and stairs, etc.
.The full height landing door should meet the following requirements: the net height of the landing door opening should not be less than 0m. In special circumstances, when the net height of the building entrance is less than 0m, it is allowed to lower the height of the lower door opening, but in any case,BelskbiavaMobile electric elevator, the net height of the lower door opening is not less than 8m. (Article 1 of GB26557-2011)
Setting requirements: Drainage measures should be set up for the foundation of construction electric elevators to ensure smooth drainage.
Construction electric elevators should be equipped with cable guide frames and comply with regulatory requirements.
The scaffolding of the parking platform should be laid tightly and firmly.
Pole
Many theaters use a lifting platform as a vertical transportation tool for goods. The rear of the main stage or the end of the side stage in many theaters are equipped with a set container transportation lifting platform, which is used to vertically transport items from the ground to a designated location or even the stage plane. The lifting platform of the music pool is often used for transporting movable seats, etc.
Work courses.Principle of electric elevator rotary valve: When the electric elevator rises, the rotary valve will automatically open. To close the plug valve, and then turn the transmission handwheel to lower the plug and achieve sealing.
The quality of the standard section should comply with the product manual and specification requirements.
Setting requirements: The landing door should be standardized and tooled.
Before installation,Belskbiava6-meter electric elevator, the installation unit should confirm that the foundation, foundation bearing capacity, embedded parts, and foundation drainage measures of the installed construction electric elevator and auxiliary heavy equipment comply with the requirements of the special construction plan for the installation and dismantling of the construction electric elevator based on the construction electric elevator foundation acceptance form, concealed engineering acceptance form, and concrete strength report.
High quality and low price.When the door is closed, except for the gap between the lower part of the door that should not exceed 35mm, any through-hole and opening size related to the distance between any door and adjacent moving parts, as well as the gap around the door or the gap between parts, should comply with the provisions of Table 4 of GB 23821-2009.
The cleanliness of the hydraulic station is an important aspect of the electric elevator hydraulic station, so it should not be taken lightly. And from a professional perspective there are relevant rules and requirements that should be referred to in the specification manual, so as to have a correct understanding and know how to achieve good cleanliness.
Acceptance: Concrete strength grade C30 strength testing report.
Belskbiava.The counterweight guide rail should meet the specification requirements.
When the wall bracket adopts non matching standard products, design calculations should be carried out.
Later, when there is a major malfunction of the lifting platform, it should be repaired by professional personnel as soon as possible. After the malfunction occurs, it should not be used again to avoid accidents, personnel and property losses.