ShanhaiguanEle
ShanhaiguanEle
Shanhaiguan12 ShanhaiguanElevator scissor electric,
When the foundation is set on the roof or floor structure, the bearing capacity of its supporting structure should be checked.
There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.
Shanhaiguan.The pressure joint between the pipe joint and the rubber hose fails prematurely, causing oil leakage or pipe explosion. The oil temperature rises due to frequent action of the overflow valve.
Drainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).
.The landing door should be in a normally closed state. Without the permission of the construction electric elevator driver, the landing door shall not be opened.
Setting requirements: The anti loosening and anti loosening parts between the connecting parts should comply with the provisions of the user manual and should not be replaced by other objects. For connecting bolts with pre tightening requirements, and the top layer is not affected. It can be customized according to the location and environment.
The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.
The usual operation of landing and docking. The installation position of the upper limit switch should comply with the following: when the lifting speed is less than 0.8m/s it is advisable to place the screw at the bottom and the nut at the top.
Civil engineering advantages: The pit depth of the guide rail type lifting platform is generally around 150-300mm, the upper safety distance L left after the upper limit switch is triggered by the hanging cage should not be less than
Setting requirements: The wall bracket should use the manufacturer's matching standard products.
original.When the door is closed, except for the gap between the lower part of the door that should not exceed 35mm,ShanhaiguanElectric elevator 8 meters, any through-hole and opening size related to the distance between any door and adjacent moving parts, as well as the gap around the door or the gap between parts, should comply with the provisions of Table 4 of GB 23821-2009.
Setting requirements: For construction electric elevators that operate in multiple shifts, the handover system should be implemented, and drivers should fill out the handover record form according to the standard requirements. The driver should conduct a pre shift inspection and confirm that there are no errors before starting the machine for operation.
The list of materials for making landing doors is as follows: Table 1: List of materials for making landing doors. Landing doors should be installed at the entrance of each landing station, and the landing doors should function properly.
The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements, otherwise protective measures shall be taken.
investment.For customers to use and operate the lifting platform for a long time, the editor briefly introduces how to maintain and repair the lifting platform: First of all,ShanhaiguanDecoration electric elevator, normal maintenance is mainly focused on prevention, especially if any damage or malfunction is detected and corrected or repaired in a timely manner. Careful inspection and maintenance at this time can save costs and avoid larger problems, resulting in costly repairs.
The cargo is 0.5m.
Advantages of electric elevator rotary valve: Simplify the installation of electric elevator pipelines; The operation is more convenient, and the valve can be opened and closed at any time; The installation of a rotary valve reduces the friction of the sealing components; Compact structure, small size and space saving; Increased the service life of electric elevator pipelines and solved the problem of easy oil leakage.
Shanhaiguan.The counterweight guide rail should meet the specification requirements.
Setting requirements: The landing door should be standardized and tooled.
Especially suitable for steel structured factories