HuanghuaHydrauThe equipment is equipped with leakage protection switches, emergency stop switches, extreme electrical limit switches, etc. The button boxes are all waterproof in design.
Check the rollers, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Fill the above components with oil. The service life of bearings can also be greatly enhanced.
Huanghua.Usage: Single column elevator: This series of products is indoor and widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has lifting balance, easy operation, and can enter general lobbies. It can enter and exit the elevator at will with low power consumption, no pollution, and does not harm the ground during work. It can be used for wall work and exploration work, and there are no dead corners during work. The single column aluminum alloy electric elevator, equipped with gantry cross frame accessories, is very suitable for maintenance work in cinemas, auditoriums,Huanghuahydraulic lift, etc. The gantry frame is easy to assemble, labor-saving to operate, flexible to move, capable of crossing obstacles such as fixed seats with a height of up to 1m, and can operate stably on steps. Made of high-strength rectangular steel pipes with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.
Elevator: The fully automatic high-altitude work platform has a sturdy structure, which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, it can walk in different working states without the need for external power supply. The handle can walk at an adjustable speed, with flexible movement, convenient operation, and easy lifting. Only one person can complete forward, backward, turning fast, slow walking, and up and down movements, saving labor and effort. Can be designed and produced according to user requirements.
.The equipment voltage is 24V DC, effectively ensuring personal safety.
Users can choose the power mode and configuration according to their usage range: the power system includes: DC power supply, single-phase or three-phase power supply, diesel engine. Walking: assisted self-propelled, two wheel traction, self driving, and car modification. Outriggers: mechanical outriggers hydraulic outriggers, ordinary hand cranked outriggers, and pull-out outriggers. System: explosion-proof electronic control system,HuanghuaFixed lifting hydraulic platform, PIC system. Hydraulic pump station: domestic lifting platform dedicated pump station, imported pump station from Italy with external protective devices: organ cover type, mesh type, and iron plate sealed type.
What are the advantages of elevators being loved and widely used by both new and old customers? What are the advantages of elevators being loved and widely used by both new and old customers; The elevator is made of high-strength tested material, which is lightweight and suitable for handling and storage. It also has four polyurethane casters that can be moved freely, making it easy to work in various locations without worrying about crushing the ground. The elevator structure is stable; The component connection strength is very high and stable, and the support mechanism design is very scientific. The overall structure is safe and stable, making people feel at ease. Strong applicability; Leg height adjustment, able to be used based on steps, stairs, and complex terrain; By using polyurethane casters, damage to marble, wooden floors, and lawns can be avoided; Able to enter and exit narrow spaces (such as elevators doors, etc.), construct and operate; Various combinations and beautiful appearance. The elevator requires no maintenance and is rust resistant; The elevator does not require maintenance. If it is not used for a long time it only needs to be lifted and lowered once every half a month. All its components have undergone anti oxidation treatment, do not rust and are also resistant to chemical corrosion.
We are well aware of the harm of pressure, but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article, you may know that oil contains excessive water impurities, which can rust the hydraulic components of the elevator, emulsify and deteriorate the oil, reduce the strength of the oil film, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance, it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate, and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!
The overall lifting guardrail device of the lifting platform has good strength, greatly reducing the height of the entire machine during transportation. The lifting platform is very convenient for loading and unloading, and can be assembled or disassembled in one lift. The lifting platform has strong load-bearing capacity and is suitable for two people to climb high at the same time; The lifting platform can also be customized into various non-standard products according to different environments to meet different needs.
Introduction to the characteristics, classification, and different uses of elevators: The overall use of high-strength aluminum profiles is refined. Due to the high strength of the profiles, they have the advantages of beautiful appearance, small volume, light weight, compact structure, convenient movement, stable lifting platform, easy operation, making high-altitude operations more convenient and fast. They can walk quickly and slowly, can adjust speed, and have a column lifting system with a large load capacity, Strong stability, large platform area, and convenient implementation. It is the ideal high-altitude work equipment for modern enterprise safety production. It can be divided into single column, double column, three column, and four column.
Quality assurance.The platform extends by 0.9 meters, expanding the working range.
The vehicle body should be grounded according to regulations, and the lifting operation should be commanded by the person in charge of the work. The person in charge should follow the standard signal and communicate with the lift operator. The signal emitted must be clear and accurate.
Product description of single mast elevator: Single mast lifting platform is suitable for single person climbing operations; The mast is made of high-strength profiles, with high safety and light overall weight; Compact structure, allowing access to narrow passages and elevators; A self-developed integrated built-in slider is used between each mast, which reduces the dynamic gap between the masts and makes the operation smoother and more reliable during lifting, far superior to ordinary independent guide wheel support structures; The lifting drive chain adopts a double chain structure and industrial plate chain, with high bearing capacity and safety factor; The guardrail structure is integral and collectible, making it extremely simple and convenient to operate; The hydraulic power unit adopts an integral pump station, with a compact structure and reliable performance; The hydraulic system is equipped with an emergency descent function, which can descend in case of unexpected situations such as power outages; The equipment voltage is 24V DC, effectively ensuring personal safety; The equipment is equipped with leakage protection switches, emergency stop switches, limit switches, etc. The button boxes are all waterproof in design.
What are the standards for selecting manufacturers of elevators? After confirming the model, configuration, and manufacturer, you can basically understand how much the user wants for a lift.
market price.Elevator quotation how much is the elevator per unit? The elevator is made of high-quality materials and has a wide range of applications, such as in factories, hotels, stations, cinemas, exhibition halls, light weight, balanced lifting, and reliability. Elevators are currently very popular in the market, with multiple models and categories, and a wide range of applications. So many customers are more concerned about how much does the elevator cost when choosing it? Regarding the issue of elevator prices, we need to consider the following aspects.
Multi column introduction: The overall structure is made of high-strength aluminum profiles. Due to the high strength of the profiles, they have the advantages of beautiful appearance, small size, light weight, compact structure, stable lifting platform, convenient operation, safety and reliability, making high-altitude work more convenient and fast. They can walk quickly and slowly, and can adjust speed. They are the ideal high-altitude work equipment for modern enterprise safety production. The main products are divided into single column aluminum alloy, double column aluminum alloy, three column aluminum alloy, and four column aluminum alloy.
Double masted lifting platform: The new generation product of the design is made of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted lifting platforms: three sets of masted support work platforms lift synchronously, and the support structure is the same as a single masted platform, with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
Huanghua.A self-developed integrated built-in slider is used between each mast to minimize the dynamic gap between the masts.
Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.
Elevator quotation, such as in factories, hotels, restaurants, stations, etc. This is because it has the following advantages: small size exhibition halls, balanced lifting, and reliability. Elevators are currently very popular in the market, with multiple models and categories, and a wide range of applications. So many customers are more concerned about how much does the elevator cost when choosing it? Regarding the issue of elevator prices, we need to consider the following aspects.