Semi automatic assisted walking lifting platform: It has more driving devices than traction lifting platform. If people cannot push it, they can use walking or lifting platform, without the need for external power supply, but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article, you may know that oil contains excessive water impurities, which can rust the hydraulic components of the elevator, emulsify and deteriorate the oil, reduce the strength of the oil film, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance, it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!
Oberhausen.Curved arm elevator: a lifting device used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position, it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, advanced integrated hydraulic and electrical integrated system. The curved arm aerial work vehicle is widely used for installation, maintenance, and climbing operations in industries such as municipal administration, electricity, street lighting, advertising, communication, photography landscaping, transportation, docks, airports and ports, and large industrial and mining enterprises.
（2） Year-end maintenance and inspection of hydraulic and pipeline connections. If the pipeline is damaged, it should be replaced immediately; When there is looseness in the connection part, tighten the pipe joint.
.How to maintain the elevator when it is not in use? If the elevator is placed in the warehouse, its weight is borne by the four parts of the elevator. Over time, the tires of the elevator may deform due to excessive pressure. So when we are idle, we must open its four support legs to bear the weight of the elevator itself, in order to protect the rubber tires.
The main purpose of the elevator is to install and maintain power lines,OberhausenElectric hydraulic mobile lifting platform, lighting appliances elevated pipelines, etc., and to carry out high-altitude operations such as high-altitude cleaning by one person.
The main lifting mast adopts high-strength profiles, which have high safety and light overall weight.
Introduction to the characteristics, and different uses of elevators: The overall use of high-strength aluminum profiles is refined. Due to the high strength of the profiles they have the advantages of beautiful appearance, small volume, light weight, compact structure, convenient movement, stable lifting platform, easy operation, safety and reliability, making high-altitude operations more convenient and fast. They can walk quickly and slowly, can adjust speed, and have a column lifting system with a large load capacity Strong stability, large platform area, and convenient implementation. It is the ideal high-altitude work equipment for modern enterprise safety production. It can be divided into single column, double column, three column and four column.
The double mast lifting platform is a new generation product, and the entire lifting platform is made of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is extremely small. The lifting platform adopts a double mast column structure, with a large load capacity, large platform area, excellent stability, flexible operation, and convenient implementation.
Elevator: The fully automatic high-altitude work platform has a sturdy structure, which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, it can walk in different working states without the need for external power supply. The handle can walk at an adjustable speed, with flexible movement, convenient operation, and easy lifting. Only one person can complete forward, backward, turning, fast, slow walking, and up and down movements, produces high-quality products, and makes the best use of everything. It is a unique advantage location with stable functions, smooth walking and lifting, flexible direction,OberhausenHydraulic fixed lifting platform, simple and convenient operation, providing you with the necessary convenience for high-altitude work and high-rise cargo transportation within the factory area and indoor. It reduces your precious time and improves your work efficiency. It is the ideal high-altitude work equipment for modern companies to safely produce.
Furthermore, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low, it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, it should be replaced with new hydraulic oil in a timely manner. Mechanical maintenance should also be done well, otherwise oxidation and deterioration may occur and cause damage to the elevator. Specializing in product and renewable resource business, including mobile elevator manufacturers
How to maintain the elevator when it is not in use? If the elevator is placed in the warehouse, its weight is borne by the four parts of the elevator. Over time, the tires of the elevator may deform due to excessive pressure. So when we are idle, we must open its four support legs to bear the weight of the elevator itself, in order to protect the rubber tires.
The elevator is small in size, light in weight, and easy to move. It can be used for both infrared and flashlight operation, making it particularly suitable for repairing electrical equipment in hotels, commercial buildings, airports, subways, stations, and scientific research institutions. It is clean and hygienic.
Click to view.Compact structure, small size in transportation status,OberhausenHydraulic lifting platform 5 meters, able to enter the car of general elevators, as well as smooth door openings and narrow passages.
Four column elevator: It is refined from high-strength aluminum profiles. Due to the high strength of profiles, it adopts a four masted structure, with excellent stability, flexible operation, large load capacity, large platform area and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. Minimize the deflection of the lifting platform. High altitude operations involving single person work such as high-altitude cleaning.
Firstly, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the elevator. If it is necessary for maintenance work, after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing elevator spare parts, it is necessary to ensure that the spare parts are available
Oberhausen.Firstly the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the elevator. If it is necessary for maintenance work, after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing elevator spare parts, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.
The elevator uses high-strength and high-quality profiles, not easily deformed, and can effectively reduce deflection during lifting, and can support high-altitude operations to higher heights. This device can perform various operations in many fields and is widely used in factories, hotels, restaurants, stations, airports, cinemas, exhibition halls, and other places. It is a safe choice for maintenance equipment painting decoration, changing lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.