Two sets of masts support the synchronous lifting of the working platform, and the elevator has stable operation; The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift; Can be equipped with gantry cross frames; Having the same convenient maneuverability as a single mast, the support structure is the same as a single mast platform; It has good load-bearing capacity and is suitable for no more than two people climbing at the same time.
Enhance the lift function
Mayday.Check for wear on rollers, intermediate shafts and bearings, oil cylinder pin shafts and bearings, boom hinge shafts and bearings, etc.
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of the elevator. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.
.Characteristics of elevator form:.
The equipment is equipped with leakage protection switches, emergency stop switches, extreme electrical limit switches, etc. The button boxes are all waterproof in design.
During the rotation operation of the elevator, it is necessary to raise the lower arm to a certain height before starting the rotation. The rotation should be slow, and attention should be paid to whether the distance between the shear arm and the platform to each equipment meets safety requirements.
Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.
Purpose: Suitable for airport terminals, aircraft repairs, large-scale high-altitude continuous operations at stations docks, shopping malls, sports venues, residential properties, factories and mining workshops, etc. Some products have the function of automatic walking, which can walk quickly and slowly under different working conditions. Only one person in the air can operate the machine to continuously complete movements such as up and down, forward, backward, and turn. When the machine is in a stopped state, as well as a tower shaped ladder shaped protective frame, provide higher stability for the lifting platform. Even at an altitude of 20 meters, lighting appliances, elevated pipelines, personnel must enter and work inside the elevator, and the elevator must be suspended to prevent sudden lowering of the elevator and causing casualties.
target.Hydraulic lifting platforms can be divided into: four wheel mobile, car modification, car type, auxiliary self-propelled, and lifting heights ranging from 4 meters to 18 meters. This series of products has a load capacity of 0.1 to 0.8 tons, and can also be customized according to user requirements, with a high load capacity of up to 10 tons.
The scientific design schemes for elevators mainly include leveling and locking circuits, telescopic balance circuits, variable amplitude balance circuits, emergency lowering systems, etc. In order to prevent sudden damage to the hydraulic system or pipelines of the platform due to accidents, and to ensure that the workbench does not experience situations that endanger the safety of personnel and equipment such as sudden arm fall or workbench overturning,MaydayHydraulic lifting cargo elevator, we have designed different solutions for each system according to its different conditions.
Firstly, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the elevator. If it is necessary for maintenance work after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing elevator spare parts, it is necessary to ensure that the spare parts are available
Test run or use completed. The elevator and site must be cleaned. When closing the hoist cover or other assembly cover. Items such as tools, rags, and removed parts should be checked for forgetting. After confirming that there are no errors. Only then can it be closed.
Good reputation.Strictly follow the operating instructions of the elevator for safe use and strictly prohibit illegal operations.
1. Shaft section: It is a closed or mesh frame enclosed by buildings or lightweight steel structures with steel guide rails installed on both sides of the interior.
The vehicle body should be grounded according to regulations, and the lifting operation should be commanded by the person in charge of the work. The person in charge should follow the standard signal and communicate with the lift operator. The signal emitted must be clear and accurate.
Mayday.The hydraulic power unit adopts an integral pump station, it is placed in the warehouse, and there are various abnormal situations when it is used again during the partition time. Therefore, if it is not ready for use for a long time, we must do a good job of long-term preservation and maintenance.
Introduction to the characteristics, classification, and different uses of elevators: The overall use of high-strength aluminum profiles is refined. Due to the high strength of the profiles,MaydayElectric mobile hydraulic lifting platform, they have the advantages of beautiful appearance, small volume, light weight, compact structure, convenient movement, stable lifting platform, easy operation, safety and reliability, making high-altitude operations more convenient and fast. They can walk quickly and slowly, can adjust speed, and have a column lifting system with a large load capacity, Strong stability large platform area, and convenient implementation. It is the ideal high-altitude work equipment for modern enterprise safety production. It can be divided into single column, double column three column, and four column.