ShiguaiAluminuThe main components of the Hunter hydraulic fixed elevator are: 1. The shaft part is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior. 2. The driving part is equipped with a hydraulic drive motor, and safety valve, A small oil tank for hydraulic components such as speed control valves and directional valves: 3. The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: 4. The door system part: It is a closed or mesh platform door or landing door system composed of steel structure, with manual and automatic doors. Generally, open platforms do not have doors. 5. The electrical part: It includes power, signal, Composition of safety and lighting devices: 6 Platform parts: It is a steel structure platform that carries heavy objects, which can be closed (i.e. cabin type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators, we need to regularly inspect, maintain, and maintain them, which can not only extend the service life of the aluminum alloy elevator, Can make it work with greater power! For example, the transmission part should have sufficient oil and vulnerable parts must be regularly inspected, repaired, especially parts that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next, let's take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).
Test run or use completed. The aluminum alloy elevator and site must be cleaned. When closing the aluminum alloy elevator cover or other assembly cover. Items such as tools, rags and removed parts should be checked for forgetting. After confirming that there are no errors. Only then can it be closed.
Shiguai.The main components of a hydraulic fixed lift are:.
Hydraulic aluminum alloy elevators not only play an important role in production, but also have a very important and widespread application in our daily lives. We all know that cleanliness and comfort are essential in public leisure and entertainment venues such as hotels guesthouses, cinemas, etc. Cleaning, lamp maintenance, and equipment debugging, installation, and maintenance of aluminum alloy elevators are all very important here.
.The hydraulic aluminum alloy elevator is widely used in various industrial enterprises and production lines such as automobile, container mold manufacturing, wood processing, chemical filling, etc., to meet the lifting requirements of different operation heights. At the same time, it can be equipped with various table forms (such as ball, roller turntable, turning, tipping, telescoping), and with various ways (transfer, explosion-proof), it has stable and accurate lifting, frequent starting The characteristics of large load capacity effectively solve various lifting and lowering difficulties in industrial enterprises, making production operations smooth. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure ensures high stability of the aluminum alloy elevator,ShiguaiAluminum alloy mobile lifting platform, with a wide working platform and high bearing capacity, making the high-altitude work range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.
Machine manufacturers and other related businesses. Merchants with this business are welcome
Advantages: As a mobile device for high-altitude operations, aluminum alloy elevators have unique functions and advantages. Aluminum alloy elevators can be used indoors and outdoors, making them convenient and fast. They can be used in a wide range of fields, ranging from construction to household grain transportation. Aluminum alloy elevators have always been supported by customers due to their unique appearance structure and durable and wear-resistant performance characteristics.
It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas of the aluminum alloy elevator engine contains carbon monoxide. This is a toxic gas that has been in low concentration for a long time
In environments with relatively low temperatures, the maintenance work of the elevator needs to be done well. To prevent hydraulic oil from freezing, we suggest replacing it with hydraulic oil of size 32 at the beginning of winter to ensure the normal operation of the lifting platform hydraulic system. In winter, the steel used for lifting platforms must not only meet the requirements of impact toughness but also meet the requirements of strength. In order to cope with the impact of low temperature, the welding structure of each load-bearing component of the lifting platform on welding thermal stress, etc., it is necessary to choose a reasonable lifting platform structure form. Metal materials are prone to reducing their service life under conditions of significant temperature changes. The braking system of aluminum alloy elevators will undergo corresponding temperature changes during mechanical use, and the state is also different from ordinary conditions, so that some corresponding measures can be taken before mechanical use.
In low concentration carbon monoxide gas. It can cause symptoms such as headache, shortness of breath, nausea and vomiting, body weakness and dizziness, psychological confusion, and even brain damage. In severe cases, it can cause death, such as starting the engine of the equipment in the garage.
Where is it.After working for 10000 hours,ShiguaiMast type aluminum alloy hydraulic lifting platform, the mechanical and electrical systems of the elevator will be overhauled.
When encountering overheating in the motor, it is necessary to stop it in a timely manner and continue running after troubleshooting. The motor bearings should be in good condition.
Regularly check all wires and cables for damage. Timely bandage and replace damaged parts.
Aluminum alloy elevators are a product of modern high-altitude operations. During their development, the performance and quality of aluminum alloy elevators have continuously strengthened, becoming the main force of modern high-altitude operations. So, how much do you know about their scientific design solutions?
device management.Aluminum alloy elevators are a product of modern high-altitude operations. During their development, the performance and quality of aluminum alloy elevators have continuously strengthened, becoming the main force of modern high-altitude operations. So, how much do you know about their scientific design solutions?
Analysis of the use of limit switches in aluminum alloy elevators. The limit switch in aluminum alloy elevators, also known as a travel switch, is a device that limits the limit position of movement and serves to maintain the switch from being damaged. The assembly regulations stipulate that the limit switch of the aluminum alloy elevator should ensure that when the platform of the aluminum alloy elevator is fully loaded and running downwards, the switch automatically cuts off the control power supply after involving the bottom line collision block. After parking, the assembly position of the bottom line collision block should be such that the distance between the platform bottom and the ground release spring is 300-400mm, The assembly position of the lower limit collision block should ensure that the limit switch operates after the bottom line switch is activated, and the aluminum alloy elevator platform cannot collide with the release spring.
Hydraulic lifting platform products are divided into curved arm hydraulic aluminum alloy elevators, scissor fork hydraulic aluminum alloy elevators, mast hydraulic aluminum alloy elevators, and straight arm hydraulic aluminum alloy elevators according to their working modes. Hydraulic aluminum alloy elevator is a replacement product of folding arm aluminum alloy elevator (lifting platform) and scissor fork aluminum alloy elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades,ShiguaiAluminum alloy hydraulic elevator, or the installation and maintenance of power systems. This aluminum alloy elevator has the advantages of light weight, self-propelled walking, electric starting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.
Shiguai.Good driving performance reduces noise, increases the clearance inside the platform, and also makes the transmission smoother and the mechanism vibrates less.
Advantages: As a mobile device for high-altitude operations, aluminum alloy elevators have unique functions and advantages. Aluminum alloy elevators can be used indoors and outdoors, making them convenient and fast. They can be used in a wide range of fields, ranging from construction to household grain transportation. Aluminum alloy elevators have always been supported by customers due to their unique appearance structure and durable and wear-resistant performance characteristics.
Therefore, and a high load-bearing capacity, making high-altitude operations more efficient and safe. To avoid the harm of voltage instability, please ensure voltage stability.