FerraraElectri
FerraraSmall swith the same position as the ring beam. The pit must be equipped with an isolation net that is 2500mm above the ground level.
The elevator suddenly opens the door and does not move after leveling the leveling reference position needs to be re determined.
Ferrara.Multiple elevator shafts can be connected and an 18-20 # I-beam can be fixed at a certain height between each adjacent elevator shaft
Slide elevators are installed inside buildings and are often used parallel to buildings and sidewalks
The elevator suddenly descends to the bottom floor and resumes normal operation: After the elevator is powered off and reconnected, but automatically resumes operation after a few minutes: The elevator (escalator) has been running for too long, and the motor overheats. To prevent burning out, the motor cools down and automatically resumes operation.
.Home elevators are different from special products such as public spaces, professional home elevators, villa home elevators, home elevator manufacturers, and small home elevators. They are 20 year old brands with advantages in price and guaranteed quality. Considering the limited installation space, lack of dedicated hoistways, and small lifting height, they pursue simplicity and miniaturization in design, and the existence of computer rooms is not necessary. Long term promotion of a domestic elevator manufacturer,FerraraSelf walking aluminum alloy lifting platform, a 20 year old brand with competitive prices and guaranteed quality!
Elevator Tip 1: Why elevators can trap people? Every elevator door on each floor has a safety switch, which can trigger the elevator to shut down in case of any abnormality. The elevator getting stuck is actually when the system detects an abnormal signal and triggers a protective device, like braking to stop.
Elevator Tip 1: Why elevators can trap people? Every elevator door on each floor has a safety switch, which can trigger the elevator to shut down in case of any abnormality. The elevator getting stuck is actually when the system detects an abnormal signal and triggers a protective device, like braking to stop.
Slide elevators are installed inside buildings and are often used parallel to buildings and sidewalks
The speed limiter tensioning device and the steel belt tensioning device should be equipped with a safety switch.
Elevators are used to transport firefighters, passengers, and fire-fighting equipment in the event of a fire. They are used to transport frozen goods in large cold storage or refrigeration workshops. However, they need to meet the requirements of sealing the door leaves and guide rails at the moving parts. Professional household elevators, household elevator manufacturers, and small household elevators have stable,FerraraStage main lifting platform,FerraraAluminum alloy mast type lifting platform, safe, reliable, and maintenance free performance, and their technical level has reached the domestic level, Meet the advanced level of international similar products and immersion requirements
Online consultation.These phenomena are not elevator malfunctions. When the elevator is fully loaded, the elevator does not stop: to avoid overloading, the elevator car no longer responds to the next station's outbound call.
There are many similar situations in daily life, such as forcefully opening the door inside the car, causing the circuit to disconnect and forcing the elevator to stop resulting in people being trapped. For example, if the elevator frequently enters and exits during decoration and falls into the crack of the door, the elevator hall door may not be tightly closed, and after several consecutive doors are opened and closed, the elevator will stop. Professional quality assurance for home elevator manufacturers. Discount activities are underway, and new and old customers are welcome to come for consultation
The braking system of the elevator is usually closed, and only when it needs to be turned on, will the power turn on the brakes. So as soon as there was a power outage, the brakes closed and the elevator was braked in mid air. When the elevator descends abnormally, it is cut off
The elevator stops on the first floor and the door does not move: the fire emergency landing function of the elevator is triggered by smoke or thermal sensors inside the building.
Pursuit of excellence.When passengers are riding on the escalator, they may lose their balance and fall due to leaning against the skirt board on the side of the escalator, which does not move, but their feet move with the steps. Especially when carrying a lot of packages while taking the elevator it is more likely to fall on the escalator due to the inability to hold the handrail properly. So, when riding on the escalator, we must stand firmly and support it well, and do not lean against the skirt board on the side of the escalator.
No oil pollution. Due to the absence of tooth profile wear issues and the need for regular oil replacement, it has a long service life, reduces oil pollution, and reduces maintenance
When passengers are riding on the escalator, they may lose their balance and fall due to leaning against the skirt board on the side of the escalator, which does not move, it is more likely to fall on the escalator due to the inability to hold the handrail properly. So, we must stand firmly and support it well, and do not lean against the skirt board on the side of the escalator.
Ferrara.There are many similar situations in daily life, such as forcefully opening the door inside the car, causing the circuit to disconnect and forcing the elevator to stop, resulting in people being trapped. For example, if the elevator frequently enters and exits during decoration and falls into the crack of the door, the elevator hall door may not be tightly closed, and after several consecutive doors are opened and closed, the elevator will stop. Professional quality assurance for home elevator manufacturers. Discount activities are underway, and new and old customers are welcome to come for consultation
When passengers are riding on the escalator, they may lose their balance and fall due to leaning against the skirt board on the side of the escalator, which does not move, but their feet move with the steps. Especially when carrying a lot of packages while taking the elevator, it is more likely to fall on the escalator due to the inability to hold the handrail properly. So, when riding on the escalator, we must stand firmly and support it well, with some indicators significantly reduced. For example, the load capacity of home elevators does not exceed 400kg, which is much lower than that of ordinary public elevators. Home elevators do not need to consider the issue of passenger flow, and the lifting speed is slower, ensuring safety. The lifting speed is generally between 0.3 to 0.4m/s, and running smoothly.