Champini sur m
Champini sur mSlide elevators are installed inside buildings and are often used parallel to buildings and sidewalks
2. Different types of civil engineering traction elevators, screw elevators, and hydraulic elevators have different requirements for civil engineering. Common traction elevators require a certain amount of hoistway space, which can be made of concrete, steel structure hoistways, and glass curtain walls to create sightseeing elevators; The depth of the pit should be at least 50cm or more; Additionally there are certain requirements for the height of the top floor.
Champini sur man.The effective support width of the upper and lower support beams should be greater than the width of the escalator truss, and there should be embedded steel plates.
Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway
.Mine elevators are used for transporting personnel and goods in mines. Special elevators are designed for special environmental conditions, such as explosion-proof, anti-corrosion, and heat-resistant elevators
As elevator people,Champini sur manDuplex villas stacked with household elevators, escalators, and dedicated cargo elevators. Dedicated cargo elevators are installed due to special needs, and we don't use many of them. Now let's take a look at the safety knowledge of box type passenger elevators and escalators: When we take escalators, Be sure to follow the safety instructions when riding on the elevator. Do not crowd or play around, hold onto the elevator firmly, fasten your shoelaces, and avoid getting them caught up.
When passengers are riding on the escalator, they may lose their balance and fall due to leaning against the skirt board on the side of the escalator, which does not move, but their feet move with the steps. Especially when carrying a lot of packages while taking the elevator, it is more likely to fall on the escalator due to the inability to hold the handrail properly. So, when riding on the escalator, we must stand firmly and support it well, and do not lean against the skirt board on the side of the escalator.
Slide elevators are installed inside buildings and are often used parallel to buildings and sidewalks
Please note that there should be a space of over 350mm left on both sides of the escalator, and when arranged in parallel, there is no restriction between the two escalators.
Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway
Test conclusion.There are many similar situations in daily life, such as forcefully opening the door inside the car, causing the circuit to disconnect and forcing the elevator to stop, resulting in people being trapped. For example, if the elevator frequently enters and exits during decoration and falls into the crack of the door, the elevator hall door may not be tightly closed, and after several consecutive doors are opened and closed, the elevator will stop. Professional quality assurance for home elevator manufacturers. Discount activities are underway, be careful not to step on the gap between the pedals, as not wearing shoes is more likely to be pinched by the toothed plate.
These phenomena are not elevator malfunctions. When the elevator is fully loaded, the elevator does not stop: to avoid overloading, the elevator car no longer responds to the next station's outbound call.
Passengers wearing long skirts and strapping sandals when riding on the escalator should try to stand slightly in the middle of the escalator to prevent shoes and clothing from being drawn into the escalator and causing danger, and to prevent skirts or pants from getting stuck.
Promise and keep promise.Overloaded elevators do not operate: The load of elevators is limited and if they are overweight, they will alarm and generally cannot be started. Most passengers can also voluntarily exit.
Drive Method&# 8217& mdash; The advantages of worm gear traction machines and permanent magnet synchronous gearless traction machines compared to worm gear traction machines are: simple and compact structure, small volume,Champini sur manAluminum alloy mobile lifting platform, and light weight. Due to the fact that the permanent magnet synchronous traction machine is directly driven, without worm gear or worm drive, and without the stator coil that occupies a significant amount of space required for asynchronous motors, its main material is high energy density, high residual magnetic induction, and high coercive force neodymium iron boron. Its air gap magnetic density generally reaches over 0.75T, so it can achieve small volume and light weight.
Elevator does not close the door or repeatedly opens and closes the door: there are debris blocking the light curtain or door contact plate at the entrance or sill.
Champini sur man.Passengers wearing long skirts and strapping sandals when riding on the escalator should try to stand slightly in the middle of the escalator to prevent shoes and clothing from being drawn into the escalator and causing danger, and to prevent skirts or pants from getting stuck.
Overloaded elevators do not operate: The load of elevators is limited, they will alarm and generally cannot be started. Most passengers can also voluntarily exit.
These phenomena are not elevator malfunctions. When the elevator is fully loaded, the elevator does not stop: to avoid overloading, the elevator car no longer responds to the next station's outbound call.