RuthHousehold 
RuthAluminum aThe elevator stops on a certain floor for a long time without moving or responding to external calls: it is possible that the elevator administrator has activated the driver operation function.
When passengers are riding on the escalator, they may lose their balance and fall due to leaning against the skirt board on the side of the escalator, which does not move, but their feet move with the steps. Especially when carrying a lot of packages while taking the elevator, it is more likely to fall on the escalator due to the inability to hold the handrail properly. So when riding on the escalator, we must stand firmly and support it well, and do not lean against the skirt board on the side of the escalator.
Ruth.Drive Method&# 8217& mdash; The advantages of worm gear traction machines and permanent magnet synchronous gearless traction machines compared to worm gear traction machines are: simple and compact structure, small volume, and light weight. Due to the fact that the permanent magnet synchronous traction machine is directly driven, without worm gear or worm drive, and without the stator coil that occupies a significant amount of space required for asynchronous motors, its main material is high energy density, high residual magnetic induction, and high coercive force neodymium iron boron. Its air gap magnetic density generally reaches over 0.75T, so it can achieve small volume and light weight.
Passengers wearing long skirts and strapping sandals when riding on the escalator should try to stand slightly in the middle of the escalator to prevent shoes and clothing from being drawn into the escalator and causing danger, and to prevent skirts or pants from getting stuck.
.Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway
Will the elevator quickly fall during a power outage& mdash;& mdash; Some movies and TV dramas often mislead the public into thinking that if the elevator loses its power, it will lose control and engage in falling movements.
The difference between home elevators and ordinary public elevators is that the focus of home elevators and ordinary public elevators is different, with some indicators significantly reduced. For example, which is much lower than that of ordinary public elevators. Home elevators do not need to consider the issue of passenger flow and the lifting speed is slower,RuthVilla Home Elevator, ensuring safety. The lifting speed is generally between 0.3 to 0.4m/s, and running smoothly.
Household elevators have gradually become an essential vertical transportation tool for modern single family, duplex, multi story, practical and convenient, and even a beautiful scenery in the home.
Dragging Method&ndash& mdash; AC dual speed, Low speed elevators with frequency modulation and speed regulation often use AC dual speed (AC -) It changes the number of poles of the electric motor to achieve speed regulation, allowing the elevator to have a low-speed operation process before the leveling brake, thereby reducing the impact of sudden deceleration during elevator leveling and improving passenger comfort. The advantages are fewer links and low failure probability, while the main disadvantages are poor comfort. The straight elevator starts frequently, and the impact current during startup is too high increasing power consumption. This type of elevator is now commonly used for freight elevators.
Household elevators must be regularly maintained to confirm their safety and whether they can continue to operate, while also repairing any faults and hidden dangers found.
Credit guarantee.Overloaded elevators do not operate: The load of elevators is limited, and if they are overweight, they will alarm and generally cannot be started. Most passengers can also voluntarily exit.
When wearing high heels, be careful not to step on the gap between the pedals, as not wearing shoes is more likely to be pinched by the toothed plate.
Elevator Tip 1: Why elevators can trap people? Every elevator door on each floor has a safety switch, which can trigger the elevator to shut down in case of any abnormality. The elevator getting stuck is actually when the system detects an abnormal signal and triggers a protective device,RuthResidential use of indoor elevators in duplex buildings, like braking to stop.
The elevator suddenly opens the door and does not move after leveling, but automatically resumes operation after a few minutes: The elevator (escalator) has been running for too long, and the motor overheats. To prevent burning out, the motor cools down and automatically resumes operation.
technical service.These phenomena are not elevator malfunctions. When the elevator is fully loaded, the elevator does not stop: to avoid overloading, the elevator car no longer responds to the next station's outbound call.
Brick concrete structure elevator shaft: For unfinished brick structure shafts, users can be required to make a circle of beams at a certain height, arranged on three sides, and should not exceed 2500mm. The beam height should be 300mm, and the thickness should be the same as the wall. The lower ring beam is 500-1500mm away from the bottom of the pit, and the higher ring beam is 200-500mm away from the lower surface of the shaft roof. The completed framework with a solid brick structure shaft can be equipped with steel plywood at the position of the fixed guide rail support frame. The position and size of the plywood are provided by the elevator, and the user is responsible for providing materials and construction. If the shaft structure is made of hollow bricks without ring beams, steel beams can be considered to be added between the frames for rectification.
The elevator suddenly opens the door and does not move after leveling, but automatically resumes operation after a few minutes: The elevator (escalator) has been running for too long, and the motor overheats. To prevent burning out, the motor cools down and automatically resumes operation.
Ruth.The elevator stops on a certain floor for a long time without moving or responding to external calls: it is possible that the elevator administrator has activated the driver operation function.
Slide elevators are installed inside buildings and are often used parallel to buildings and sidewalks
Will the elevator quickly fall during a power outage& mdash;& mdash; Some movies and TV dramas often mislead the public into thinking that if the elevator loses its power, it will lose control and engage in falling movements.