Cohen NippsFully automatic hydraulic pressure for plate rolling machineIndustry development opportunities and directions

announcer:hp938HP166090698 release time:2024-02-13 13:11:45

Overloaded elevators do not operate: The load of elevators is limited, and if they are overweight, they will alarm and generally cannot be started. Most passengers can also voluntarily exit.

Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway

Cohen Nipps.Reduce the overall noise of the machine. Due to the absence of noise from bearings during high-speed operation of an asynchronous motor and the absence of noise from worm gear transmission,Cohen NippsSemi-automatic reclaimer, the overall noise can be reduced by 5-10db (A) Low energy consumption. From the working principle of permanent magnet synchronous motors, it can be seen that their excitation is achieved by permanent magnets, and there is no need for the stator to provide additional excitation current. Therefore, the power factor of elevators can reach a very high level. At the same time, the rotor of the motor has no current and there is no problem of electronic loss. Generally, it reduces consumption by 45% -60% compared to asynchronous motors. Due to the lack of low efficiency and high energy consumption worm gear transmission pairs, energy consumption is further reduced.

Passengers wearing long skirts and strapping sandals when riding on the escalator should try to stand slightly in the middle of the escalator to prevent shoes and clothing from being drawn into the escalator and causing danger, and to prevent skirts or pants from getting stuck.

.The elevator stops on the first floor and the door does not move: the fire emergency landing function of the elevator is triggered by smoke or thermal sensors inside the building.

There are many similar situations in daily life, such as forcefully opening the door inside the car, causing the circuit to disconnect and forcing the elevator to stop, resulting in people being trapped. For example, if the elevator frequently enters and exits during decoration and falls into the crack of the door, and after several consecutive doors are opened and closed, the elevator will stop. Professional quality assurance for home elevator manufacturers. Discount activities are underway, and new and old customers are welcome to come for consultation

Passengers wearing long skirts and strapping sandals when riding on the escalator should try to stand slightly in the middle of the escalator to prevent shoes and clothing from being drawn into the escalator and causing danger, and to prevent skirts or pants from getting stuck.


Cohen NippsFully automatic hydraulic pressure for plate rolling machineIndustry development opportunities and directions



The seat elevator person sits on a chair driven by an electric motor, and the button on the chair handle causes the power drive device at the bottom of the chair to drive the person chair up and down along the guide rail of the staircase railing

The treatment of general civil engineering problems on escalator sites: the beam edge distance is too large: in this case, the length of the upper and lower platforms of the escalator can be increased to meet the actual dimensions of civil engineering. One platform can be extended on one side, or both platforms can be extended simultaneously. The total extension of the upper and lower platforms should generally not exceed 1000mm. When lengthening the platform, attention should be paid to the length of the pit or the opening of the floor slab which should also be lengthened at the same time. After the escalator is extended, the force on the upper and lower support points will also increase. If the edge distance of the beam increases too long, support needs to be added in the middle of the escalator truss. In addition,Cohen NippsSemi electric high-altitude reclaimer, changing the angle of the escalator from 35 degrees to 30 degrees can also make the beam edge distance longer.

The difference between home elevators and ordinary public elevators is that the focus of home elevators and ordinary public elevators is different, with some indicators significantly reduced. For example, the load capacity of home elevators does not exceed 400kg, which is much lower than that of ordinary public elevators. Home elevators do not need to consider the issue of passenger flow, and the lifting speed is slower, ensuring safety. The lifting speed is generally between 0.3 to 0.4m/s, and running smoothly.

Project scope.When encountering abnormal elevator operation you can call the repair hotline to consult with the maintenance personnel or inform the service center to handle it. Do not take unauthorized measures to avoid causing greater harm to the elevator or even causing casualties.

The seat elevator person sits on a chair driven by an electric motor, and the button on the chair handle causes the power drive device at the bottom of the chair to drive the person chair up and down along the guide rail of the staircase railing

In daily life, elevators are a commonly used tool that brings us a lot of convenience. But how much do you know about the types and safety knowledge of elevators?


Cohen NippsFully automatic hydraulic pressure for plate rolling machineIndustry development opportunities and directions



Elevators are used to transport firefighters, passengers, and fire-fighting equipment in the event of a fire. They are used to transport frozen goods in large cold storage or refrigeration workshops. However, they need to meet the requirements of sealing the door leaves and guide rails at the moving parts. Professional household elevators, villa household elevators, and small household elevators have stable, safe, reliable, and maintenance free performance, and their technical level has reached the domestic level, Meet the advanced level of international similar products and immersion requirements

original.The elevator stops on a certain floor for a long time without moving or responding to external calls: it is possible that the elevator administrator has activated the driver operation function.

Drive Method&# 8217& mdash; The advantages of worm gear traction machines and permanent magnet synchronous gearless traction machines compared to worm gear traction machines are: simple and compact structure, small volume, and light weight. Due to the fact that the permanent magnet synchronous traction machine is directly driven, without worm gear or worm drive and without the stator coil that occupies a significant amount of space required for asynchronous motors,Cohen NippsMobile hydraulic turnover machine, high residual magnetic induction, and high coercive force neodymium iron boron. Its air gap magnetic density generally reaches over 0.75T, so it can achieve small volume and light weight.

Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway

Cohen Nipps.Aircraft weighing tens or hundreds of tons in the elevator hangar are vertically lifted onto the airport runway

The gantry elevator is used in the door legs of large gantry cranes to transport workers and maintenance components inside the gantry crane

The difference between home elevators and ordinary public elevators is that the focus of home elevators and ordinary public elevators is different, with some indicators significantly reduced. For example, the load capacity of home elevators does not exceed 400kg, which is much lower than that of ordinary public elevators. Home elevators do not need to consider the issue of passenger flow, and the lifting speed is slower, and running smoothly.