OrleansElectri
OrleansFully aSetting requirements: Each landing entrance should be equipped with a landing door,OrleansElectric mobile elevator, which should cover the opening with its full width, and should not open towards the lifting passage.
Setting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.
Orleans.Before installing the construction electric elevator, the foundation should be inspected and approved before installation.
When the wall bracket adopts non matching standard products, design calculations should be carried out.
.The use of a lifting platform as a tool for storing performance blankets, soft scenery, etc. In some theaters, there is a soft scenery storage lifting platform located at an appropriate location on the stage for the storage of blankets, soft scenery, etc.
Spiral electric lifting mechanism: With all the functions of a regular lifting platform, auxiliary lifting platforms are often arranged in front, back left, and right of the main stage lifting platform. The side and rear auxiliary lifting platforms are used for the smooth opening of the side platform and rear vehicle turntable,OrleansDC electric elevator, while the front auxiliary lifting platform is used to place the rear vehicle turntable near the platform entrance. The leveling lifting platform below the side platform and rear vehicle turntable can be used to level the platform after the side platform or rear vehicle turntable is driven out, so that the entire platform does not have a height difference, ensuring the safety of the cast members.
The oil cylinder and sealing components are made of imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.
A lifting platform with specifications ranging in height from 1 meter to 20 meters.
The oil cylinder and sealing components are made of imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.
Quality inspection report.The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.
Setting requirements: The landing door should be standardized and tooled.
When applying a normal force of 300N to any position on either side of the door using a rigid 5000mm2 square or circular flat surface in the locked position of the landing door, the door should be able to withstand and have no deformation; - Deformation not exceeding 30mm; After the test, it worked normally.
The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.
Word of mouth recommendation.The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed.
Precautions during operation: Mechanical operations should be gentle and smooth, and mechanical operations should be avoided, causing frequent mechanical failures and greatly shortening the service life. Generated during homework
When the door is closed, except for the gap between the lower part of the door that should not exceed 35mm, any through-hole and opening size related to the distance between any door and adjacent moving parts, should comply with the provisions of Table 4 of GB 23821-2009.
Orleans.When the wall bracket cannot meet the requirements of the construction site, it should be designed and calculated separately.
Setting requirements: The quality of the standard section should meet the requirements of the product manual. Before installing the construction electric elevator, all components should be inspected, and standard sections and other components with severe wear and deformation should be replaced.
The net height of the landing door opening should not be less than 8m,OrleansElevator electric micro, and the difference between the net width and the outlet width of the cage door should not exceed 120mm. When the floor door is closed, except for the gap between the lower part of the door that should not exceed 35mm, the size of any through-hole and opening related to the distance between any door and adjacent moving parts, as well as the gap around the door or between parts, should comply with the provisions of Table 4 of 'Mechanical Safety - Safety Distance to Prevent Upper and Lower Limbs from Touching Dangerous Areas' GB23821-2009.