the horizontal distance between the edge of the cage door and the edge of the landing station should not exceed 50mm.
The hydraulic oil forms a certain pressure by the vane pump
During loading and unloading,GyrusDingli Electric Elevator, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge. The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects).
Gyrus.Do not move after lifting, and do not lift until the four legs are firmly supported.
When the foundation is set on the roof or floor structure, the bearing capacity of its supporting structure should be checked.
.Double layer steel mesh: The diameter of the steel bars is 12mm, with a spacing of 200mm.
Pipeline rupture valve: When the hydraulic system pipeline ruptures and the car stalls and descends, it can automatically cut off the oil circuit and stop descent
The use of standard section connecting bolts should comply with the user manual and specification requirements.
The L distance depends on the selected wall mount model.
Non automatic reset upper and lower limit switches should be installed at both the upper and lower ends of the stroke,
Remind customers that there are still many areas to pay attention to when maintaining and maintaining the lifting platform. We also hope that customers and friends can pay more attention when using it to ensure the safety of personnel and property, regularly maintain and extend its service life, and create greater benefits for the enterprise. What is the matching degree of electric elevators? Everyone has always been confused. In short, the matching degree of electric elevators is how the height of the electric elevator can be combined with the operating height. Electric elevators are not used frequently, We suggest considering purchasing a guide rail electric elevator or a scissor fork electric elevator. The scissor fork electric elevator can achieve a maximum load capacity of 100 tons, which effectively solves the problem of load capacity. If the frequency of use is too high and the height is relatively high, we recommend using a guide rail electric elevator. This type of electric elevator is not easy to malfunction under high-frequency operation, By solving the load capacity and frequency of use, the matching problem of electric elevators is effectively solved. Concept of electric elevator rotary valve: The electric elevator rotary valve is a type of valve that quickly opens and closes, and the rotary valve can reduce oil pipeline channels and optimize line settings.
How much is it.It is reported that a fixed electric elevator has good lifting stability and can only be used for fixed operations making high-altitude operations easier
The spacing between wall brackets and the height of guide rails above the high attachment point should comply with the requirements of the user manual.
There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.
During the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, and record the inspection results.
Installation conditions.The function of the lifting platform in a theater is roughly as follows: the main lifting platform arranged in the main performance area of the stage is mainly used to quickly change the scenery. Typically, with&quo; Product; In the music and dance theater stage arranged in a zigzag pattern, the lifting platform, side car platform, and rear car turntable perform a rapid transformation of the entire or partial scene. This arrangement allows for rapid switching of three full sets.
In addition to fixed modes, there are also types of car mounted mobile devices. As the name suggests this type of lifting device is a combination of lifting equipment and car mounted systems. It is very flexible to move,Gyrus10 meter electric elevator, and of course, it is better to use it. For example, there are such lifting devices in airports,GyrusSmall 100kg electric elevator, and car stations or sports stadiums may also be equipped with such devices, as they can be moved, So the scope of the operation is not limited to a specific place, but can be used wherever lifting operations are required. For example, when installing outdoor advertisements, some advertisements are relatively high in height. At this time, mobile lifting equipment can be used to transport billboards or staff to the designated height for work. This type of equipment can also be divided into two types based on the driving mode: hydraulic lifting and electric lifting. The so-called hydraulic lifting is the use of hydraulic oil to drive and reach a specified height. The electric mode is driven by a motor or teeth to lift to a certain height. However, currently, hydraulic lifting platforms are more widely used.
When applying a normal force of 300N to any position on either side of the door using a rigid 5000mm2 square or circular flat surface in the locked position of the landing door, the door should be able to withstand and have no deformation; - Deformation not exceeding 30mm; After the test, it worked normally.
Gyrus.The list of materials for making landing doors is as follows: Table 1: List of materials for making landing doors. Landing doors should be installed at the entrance of each landing station, and the landing doors should function properly.
Setting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.
Acceptance: Concrete strength grade C30, strength testing report.