SiroliTen mete
SiroliPortableThe connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.
Tank oil temperature protection: When the oil temperature in the tank exceeds the standard setting value, the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops
Siroli.The usual operation of landing and docking. The installation position of the upper limit switch should comply with the following: when the lifting speed is less than 0.8m/s, the horizontal distance between the edge of the cage door and the edge of the landing station should not exceed 50mm.
.Construction electric elevators should be equipped with cable guide frames and comply with regulatory requirements.
The safety distance between the outer edge of the upper part of the landing door and the moving parts of the electric elevator during normal operation should not be less than 0.75m; If the rated speed is not greater than 0.7m/s,SiroliElectric rope climbing machine elevator, the safety distance can be 0.40m.
The spacing between wall brackets and the height of guide rails above the high attachment point should comply with the requirements of the user manual.
The advantages and disadvantages of several commonly used electric lifting mechanisms are as follows: hydraulic electric lifting mechanisms: using hydraulic technology, smooth lifting and low noise.
The suspension cage movement can only be resumed after operator operation.
Operating cost advantage and low failure rate: Due to the use of advanced hydraulic systems and good methods, the operating failure rate can be reduced to a low level.
Focus on Development.The counterweight guide rail should meet the specification requirements.
Civil engineering advantages: The pit depth of the guide rail type lifting platform is generally around 150-300mm, and the top layer is not affected. It can be customized according to the location and environment.
Drivers of construction electric elevators should hold special construction operations and are not allowed to operate without a certificate.
Setting requirements: For construction electric elevators that operate in multiple shifts, the handover system should be implemented, and drivers should fill out the handover record form according to the standard requirements. The driver should conduct a pre shift inspection and confirm that there are no errors before starting the machine for operation.
Recommendation and consultation.The spacing between wall brackets and the height of guide rails above the high attachment point should comply with the requirements of the user manual.
Is the water cooling and air cooling of the hydraulic station the same?
Work is essential, and the main protective accessories include safety belts,SiroliTricycle electric elevator, guardrails, protective covers, platforms and stairs etc.
Siroli.Setting requirements: For construction electric elevators that operate in multiple shifts, the handover system should be implemented,SiroliElectric lifting platform 2 meters, and drivers should fill out the handover record form according to the standard requirements. The driver should conduct a pre shift inspection and confirm that there are no errors before starting the machine for operation.
The function of the lifting platform in a theater is roughly as follows: the main lifting platform arranged in the main performance area of the stage is mainly used to quickly change the scenery. Typically, with&quo; Product; In the music and dance theater stage arranged in a zigzag pattern, the lifting platform, side car platform, and rear car turntable perform a rapid transformation of the entire or partial scene. This arrangement allows for rapid switching of three full sets.
From the above comparison, it can be seen that hydraulic electric lifting mechanisms have stable lifting low noise, large load bearing capacity, and are relatively simple, making them suitable for use in stage equipment.