BiawestockFixeRefueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
Biawestock.Electric motor is also very important in the entire elevator, which is related to the operating efficiency of the elevator. If the motor does not work properly, the efficiency of the elevator will be reduced. Once the working efficiency of the elevator decreases, the work progress will slow down, making the enterprise unable to complete the object transportation work as scheduled, they can be used for transporting goods between various working floors, especially in some underground warehouses or other production work. The use of automatic cargo elevators in workshops is very important, and when in use, Its safety device settings are very good,BiawestockSmall scissor lift table, which can achieve good operation and better performance.
.When using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
To understand the operation of the mechanism the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve, throttle valve,BiawestockSmall mobile Niuli elevator, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure,BiawestockSmall fixed lifting platform, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
The sample will not pose any harm to the lifting platform, thereby increasing its service life.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
property right.The electric lifting platform needs to work under load according to the regulations on the nameplate during use, but overloading is strictly prohibited during use. Especially in emergency situations, it can only briefly overload by 10%.
These devices are also relatively easy to operate during use and should be able to achieve goals and requirements.
Having a better understanding of the way to close the switch or the situation in each automatic design aspect can improve efficiency and pay attention to these different information when using them.
Suitable for various rugged terrain in the wild, with a wide range of spatial operations, mainly used for construction, bridge construction, ship manufacturing, airports, mines, port terminals, and outdoor advertising engineering machinery equipment.
market price.The distance between heavy and empty loads is small, with high leveling accuracy and easy adjustment. Standard elevator boards, LCD display call boxes, relevant wiring harnesses, and connectors are selected for easy adjustment
The main actions of the hydraulic cylinder elevator are lifting and lowering, and the main components that affect these two actions are the hydraulic cylinder. When the hydraulic cylinder is not operating properly, the lifting and lowering actions can also appear sluggish which can lead to a decline in the efficiency of conveying objects. In order to avoid a decline in the efficiency of object transportation, it is necessary to always pay attention to the condition of the hydraulic cylinder and promptly solve the problem of the hydraulic cylinder.
The design of the product and some related situations are all very important. Moreover, learning about these automated information and systems through different channels and channels can help one make the right choices. In fact, many products come in different types. When choosing electric elevators, some professional companies can help people understand the situation of these products, learn about fixed and special products and design them according to customer needs, To achieve better results, in the overall process of equipment design, people will have better choices for these lifting platforms and also pay attention to some related performance characteristics and operational aspects, and pay attention to issues.
Biawestock.What is the difference between a self-propelled elevator and a self-propelled hydraulic elevator?
When using equipment, people will consider different information and situations, and reference them based on these elements. Therefore, when using electric elevators, it can bring better work efficiency to people, and also enable them to achieve certain efficiency during the use process. Many manufacturers can cooperate with some very professional companies when designing products. Because material selection also meets strict requirements and standards, it can provide customers with better quality choices when designing products.
The functions of electric cargo elevators are very diverse, and many equipment designs are very complex. If ideal delivery requirements can be achieved during operation, the sealing conditions, specific critical states, and information need to be taken seriously. It is also crucial to understand the safety performance of these operations, Some security information is also very important, and it is important to pay attention to the characteristics of performance.