HuvdopAluminumRegularly check the connection of each part and tighten it if there is any looseness. The tightness of the body connecting bolts should be checked when the body is under pressure (the rotating arm can be used to cause compression), and all connecting shafts must have split pins and be sufficient. Professional items
. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, it is necessary to keep the maintenance site clean and dust-free. When repairing and fastening screws for aluminum alloy elevators, it is necessary to use the correct diagonal first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the aluminum alloy elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the maintenance of the aluminum alloy elevator is completed, the equipment maintenance record must be filled out. The maintenance record should include the equipment maintenance date, the personnel participating in the maintenance, the maintenance items, the brand, model and specification of the replaced parts, the effectiveness of the maintenance, and whether the equipment still has problems after the maintenance is completed.
Huvdop.Attention: When replacing the adjusting steel wire rope, the half round head bolt should be unscrewed first to allow the moving nut to roll together with the force bolt, so as not to move the nut up and down too much and damage other components. After replacing the safety wire rope of the aluminum alloy elevator platform, adjust the position of the collision rod from the beginning to reach the ultra-high limit position. The limit switch of the aluminum alloy elevator platform should be regularly inspected and replaced or repaired in case of damage.
Firstly, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the aluminum alloy elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the aluminum alloy elevator. If it is necessary for maintenance work, after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing spare parts for aluminum alloy elevators, it is necessary to ensure that the spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When hydraulic aluminum alloy elevator maintenance requires entering the platform for internal work, after the aluminum alloy elevator is lifted the working surface of the aluminum alloy elevator must be fixed or supported firmly with a crane or other equipment,
.Performance characteristics of Xiangte aluminum alloy elevator: The hydraulic system of aluminum alloy elevator products is generally equipped with safety protection devices such as anti fall, overload, and power outage. The entrance and exit of the table are equipped with hanging chains or crossbars, guardrails and warning lights or bells for the operation of the lifting platform, as well as safety switches that close the lifting platform circuit when the door is open. Extremely generous, operators can operate in multiple layers, jog or safe mode.
Hydraulic aluminum alloy elevators not only play an important role in production, but also have a very important and widespread application in our daily lives. We all know that cleanliness and comfort are essential in public leisure and entertainment venues such as hotels, guesthouses, cinemas, etc. Cleaning, lamp maintenance, and equipment debugging,HuvdopProduction of aluminum alloy lifting platforms, installation, and maintenance of aluminum alloy elevators are all very important here.
On the friction surface, there should be no dirt present, and any dirt must be washed off with gasoline or thinner.
Six mast aluminum alloy elevator: adopts a 4+2 lifting structure, and the main structure is made of high-quality high-strength aluminum profiles, with high strength, heavy load, good stability, flexible operation, large platform area, and convenient implementation. It is suitable for 1-2 people to climb high at the same time.
Dangerous parts that move back and forth, such as the hammer body of a forging hammer, the slider of a pressure machine, the blade of a shearing machine, and the teeth at the edge of a band saw.
Therefore, using a stable voltage for aluminum alloy elevators is crucial for safe operation. Aluminum alloy elevators have high stability, a wide working platform, making high-altitude operations more efficient and safe. To avoid the harm of voltage instability, please ensure voltage stability.
The cheapest.The main components of the Hunter hydraulic fixed elevator are: 1. The shaft part is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior. 2. The driving part is equipped with a hydraulic drive motor, oil pump, and safety valve, A small oil tank for hydraulic components such as speed control valves and directional valves: 3. The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: 4. The door system part: It is a closed or mesh platform door or landing door system composed of steel structure, with manual and automatic doors. Generally open platforms do not have doors. 5. The electrical part: It includes power, signal, Composition of safety and lighting devices: 6 Platform parts: It is a steel structure platform that carries heavy objects, which can be closed (i.e. cabin type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators, we need to regularly inspect, maintain and maintain them, which can not only extend the service life of the aluminum alloy elevator, Can make it work with greater power! For example, the transmission part should have sufficient oil, and vulnerable parts must be regularly inspected, repaired, or replaced. Mechanical bolts, especially parts that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next, let's take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).
Driving under the influence of alcohol is strictly prohibited, and ongoing high-altitude operations should also be terminated if feeling unwell.
In low concentration carbon monoxide gas. It can cause symptoms such as headache, shortness of breath, nausea and vomiting, body weakness and dizziness, it can cause death, such as starting the engine of the equipment in the garage.
Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
analysis.Users can choose the power mode and configuration according to their usage range: the power system includes: DC power supply, single-phase or three-phase power supply, diesel engine. Walking: assisted self-propelled, two wheel traction, self driving and car modification. Outriggers: mechanical outriggers, ordinary hand cranked outriggers hydraulic outriggers, and pull-out outriggers. System: explosion-proof electronic control system, remote control system, PIC system. Hydraulic pump station: domestic lifting platform dedicated pump station, imported pump station from Italy with external protective devices: organ cover type, mesh type, movable flip plates that are easy to overlap with surrounding facilities, rolling or motorized roller tracks, safety contact strips to prevent foot rolling, organ type safety protective covers, manual or motorized rotating workbenches,HuvdopAluminum alloy work lifting platform, hydraulic overturning workbenches, safety support rods to prevent elevator falls, stainless steel safety nets,HuvdopCustomized aluminum alloy elevator, electric or hydraulic elevator walking power systems, and universal ball countertops.
With the continuous development of society, many things can be solved on the internet. For mobile elevators, their prices also vary greatly. Due to various factors, their prices vary. So what are the reasons for the large price difference for aluminum alloy elevators? Below, I will take you to understand the reasons for the large price difference of aluminum alloy elevators.
Huvdop.The protected leg structure makes work safer and can be used for lifting and lowering operations close to the working face.
Method: Check if the hydraulic oil in the mailbox is sufficient; Check if the oil filler cap of the fuel tank is excessively sealed causing difficulty in oil pump suction. Check if the connection of the oil pump suction pipeline is loose to prevent air from the oil pump; Check whether the motor, cover, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions. Air, check whether the motor, cover, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions.
Method: Check the length or diameter of the power supply lead. When the wire length is not more than 25 meters, the wire diameter should not be less than 1m ²; When the wire length is not greater than 50 meters