HuairenAluminu
HuairenHydraulIt is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas of the aluminum alloy elevator engine contains carbon monoxide. This is a toxic gas that has been in low concentration for a long time
When repairing an aluminum alloy elevator, in order to protect the safety of workers and ensure the repair effect, there are many precautions to pay attention to during the maintenance process. We have summarized the relevant matters for your reference only.
Huairen.At present, the general elevator is used to transport materials from the external material platform to the inside of the building, while the aluminum alloy elevator has changed to conveying materials from the inside out. The elevator shaft is used as a protective fence, and the elevator shaft wall is used for load-bearing, while the floor slab is used as a material platform. The working and transportation principles have changed, making it more suitable for modern construction requirements.
After working for 10000 hours, the mechanical and electrical systems of the elevator will be overhauled.
.The protected leg structure makes work safer and can be used for lifting and lowering operations close to the working face.
In low concentration carbon monoxide gas. It can cause symptoms such as headache shortness of breath, nausea and vomiting, body weakness and dizziness, psychological confusion and even brain damage. In severe cases, it can cause death, two wheel traction, car modification, car type, auxiliary self-propelled, and lifting heights ranging from 4 meters to 18 meters. This series of products has a load capacity of 0.1 to 0.8 tons, the deflection of the lifting platform is extremely small. Its appearance allows for high lifting capacity in extremely small spaces. Make single person high-altitude operations easy and cannot be moved, only fixed operations can be carried out. Fixed elevator is a type of elevator with good lifting stability, which cannot be moved but can only be fixed for operation, making high-altitude operations easy. Mainly used for transporting goods between height differences in production lines; Material online and offline; Adjust the height of the workpiece during assembly; High altitude feeder feeding; Lifting of components during assembly of large equipment; Large machine material and cutting; The warehouse loading and unloading site is equipped with forklift and other transportation vehicles for rapid loading and unloading of goods. According to usage requirements, accessory devices can be configured for any combination, such as safety protection devices for fixed elevators; Electrical methods; Form of work platform; Power form, etc. The correct selection of various configurations can maximize the functionality of the elevator and achieve excellent usage results.
Double masted aluminum alloy lifting platform: a new generation product of the design, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted aluminum alloy lifting platforms: three sets of masts support the operation platform for synchronous lifting, and the support structure is the same as a single masted platform, and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
average method.The contact opening and closing of the travel switch of each safety device must be reliable, and the contact crater should be polished in a timely manner.
When installing, disassembling, and adjusting the rotating mechanism, it is important to ensure that the centerline of the reducer of the rotating mechanism is parallel to the centerline of the gear, and its meshing surface is not less than 70%. The meshing clearance should be suitable.
Method: Check if the hydraulic oil in the mailbox is sufficient; Check if the oil filler cap of the fuel tank is excessively sealed, causing difficulty in oil pump suction. Check if the connection of the oil pump suction pipeline is loose to prevent air from the oil pump; Check whether the motor,HuairenMast type aluminum alloy lifting platform, cover, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions. Air, check whether the motor, cover, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions.
Therefore, using a stable voltage for aluminum alloy elevators is crucial for safe operation. Aluminum alloy elevators have high stability, a wide working platform, and a high load-bearing capacity making high-altitude operations more efficient and safe. To avoid the harm of voltage instability, please ensure voltage stability.
Potential development.Method for hydraulic oil leakage in aluminum alloy elevator: Check if the pipe joints are loose and try to tighten them. Check if the viscosity of the hydraulic oil used is too low. When checking the leakage point of the hydraulic oil system, generally, the place where hydraulic oil seeps out is the leakage point, but it is not ruled out that the leaked hydraulic oil may accumulate along the pipeline deviating from the leakage point. Therefore, it is important to carefully search during inspection. High priced aluminum alloy elevator manufacturers of various specifications welcome scrap merchants,HuairenAluminum alloy hydraulic lifting platform, industrial companies, enterprises, and power departments to visit and negotiate with the company!
In environments with relatively low temperatures, the maintenance work of the elevator needs to be done well. To prevent hydraulic oil from freezing, we suggest replacing it with hydraulic oil of size 32 at the beginning of winter to ensure the normal operation of the lifting platform hydraulic system. In winter, the steel used for lifting platforms must not only meet the requirements of impact toughness, but also meet the requirements of strength. In order to cope with the impact of low temperature, the welding structure of each load-bearing component of the lifting platform on welding thermal stress, stress concentration, etc., it is necessary to choose a reasonable lifting platform structure form. Metal materials are prone to reducing their service life under conditions of significant temperature changes. The braking system of aluminum alloy elevators will undergo corresponding temperature changes during mechanical use, and the state is also different from ordinary conditions, so that some corresponding measures can be taken before mechanical use.
Therefore, using a stable voltage for aluminum alloy elevators is crucial for safe operation. Aluminum alloy elevators have high stability, a wide working platform, and a high load-bearing capacity, making high-altitude operations more efficient and safe. To avoid the harm of voltage instability,HuairenFixed aluminum alloy elevator, please ensure voltage stability.
Huairen.The lifting product has a sturdy structure, large load-bearing capacity, stable lifting, simple and convenient installation and maintenance, making it an ideal economic and practical cargo conveying equipment for replacing elevators between low floors. If the required size is large, a fixed double span hydraulic lift can be used. The double span lift is stable, has a large bearing capacity, and is easy to operate. It is widely used in industries such as vehicle maintenance, kilns and equipment matching.
The protected leg structure makes work safer and can be used for lifting and lowering operations close to the working face.
Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.