Performance characteristics of Xiangte aluminum alloy elevator: The hydraulic system of aluminum alloy elevator products is generally equipped with safety protection devices such as anti fall, overload, and power outage. The entrance and exit of the table are equipped with hanging chains or crossbars, guardrails, and warning lights or bells for the operation of the lifting platform as well as safety switches that close the lifting platform circuit when the door is open. Extremely generous, operators can operate in multiple layers, jog or safe mode.
The standard rack free design of the lifting and lowering machine with high safety performance ensures that the platform will not fall, and the limit and limit switches further ensure the safety of construction personnel.
BaileAtha I.Dangerous parts that move back and forth, such as the hammer body of a forging hammer, the slider of a pressure machine, the blade of a shearing machine, and the teeth at the edge of a band saw.
An aluminum alloy elevator equipment consisting of a walking mechanism, hydraulic mechanism, electric mechanism, and support mechanism. The hydraulic oil forms a certain pressure by the vane pump,BaileAtha IMonorail column aluminum alloy elevator, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve,BaileAtha IAluminum alloy hydraulic elevator, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve,BaileAtha I4-pillar aluminum alloy elevator, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
.Regularly check all wires and cables for damage. Timely bandage and replace damaged parts.
Three masts aluminum alloy elevator: The main structure is made of high-quality high-strength aluminum profiles, with super large load capacity and working stability. The overall lifting guardrail device has good strength, greatly reducing the overall height during transportation, and making loading and unloading convenient. This machine has strong load-bearing capacity and is suitable for 2-3 people to climb heights simultaneously.
Firstly, unstable voltage can easily burn out various electrical components inside the operation box, making the equipment unable to receive signals.
Double masted aluminum alloy lifting platform: a new generation product of the design, made entirely of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted aluminum alloy lifting platforms: three sets of masts support the operation platform for synchronous lifting, and the support structure is the same as a single masted platform, with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
Additionally, it should be noted that there will be a box and a distribution box inside the elevator.
Working on an aluminum alloy elevator workbench. Must wear safety belts, helmets, with steel guide rails installed on both sides of the interior. 2. The driving part is equipped with a hydraulic drive motor, oil pump, and safety valve, A small oil tank for hydraulic components such as speed control valves and directional valves: 3. The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: 4. The door system part: It is a closed or mesh platform door or landing door system composed of steel structure, with manual and automatic doors. Generally, signal, Composition of safety and lighting devices: 6 Platform parts: It is a steel structure platform that carries heavy objects, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators, we need to regularly inspect, maintain, and maintain them which can not only extend the service life of the aluminum alloy elevator, Can make it work with greater power! For example, the transmission part should have sufficient oil, and vulnerable parts must be regularly inspected, repaired, especially parts that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next, let's take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).
Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time replacing a new power unit also requires a certain cost.
Driving under the influence of alcohol is strictly prohibited, and ongoing high-altitude operations should also be terminated if feeling unwell.
offer.The surface of each part of the brush should be kept clean, and the brush pressure should be adjusted to ensure that its area is not less than 50%.
1. Shaft section: It is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior. A specialized product manufacturing enterprise that integrates research and development, as well as service. Long term professional aluminum alloy elevator manufacturer
Machine manufacturers and other related businesses. Merchants with this business are welcome
BaileAtha I.Hydraulic aluminum alloy elevators not only play an important role in production, but also have a very important and widespread application in our daily lives. We all know that cleanliness and comfort are essential in public leisure and entertainment venues such as hotels, guesthouses cinemas, etc. Cleaning, lamp maintenance, and equipment debugging, installation, and maintenance of aluminum alloy elevators are all very important here.
The lifting product has a sturdy structure, large load-bearing capacity, stable lifting, simple and convenient installation and maintenance, making it an ideal economic and practical cargo conveying equipment for replacing elevators between low floors. If the required size is large, a fixed double span hydraulic lift can be used. The double span lift is stable, has a large bearing capacity, kilns, and equipment matching.
The cost of aluminum alloy elevators also depends on the cost of the product. Products with different material specifications have different functions, lifespan, and safety performance. When it comes to aluminum alloy elevators, many people only focus on price, neglecting safety and durability.