WiesbadenElevaThe contact opening and closing of the travel switch of each safety device must be reliable, and the contact crater should be polished in a timely manner.
Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.
Wiesbaden.The hydraulic system of aluminum alloy elevator products is generally equipped with safety protection devices such as anti fall, overload, guardrails, warning lights or bells for the operation of the lifting platform, jog or safe mode.
Method: Check the length or diameter of the power supply lead. When the wire length is not more than 25 meters, the wire diameter should not be less than 1m ²; When the wire length is not greater than 50 meters, the wire diameter should not be less than 5m ². You can try fixing the plug directly to the socket without moving the cable.
.. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the aluminum alloy elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing and fastening screws for aluminum alloy elevators, it is necessary to use the correct diagonal first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the aluminum alloy elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people,WiesbadenAluminum alloy lifting herringbone ladder, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the maintenance of the aluminum alloy elevator is completed, the equipment maintenance record must be filled out. The maintenance record should include the equipment maintenance date, the personnel participating in the maintenance, the maintenance items, the brand, model and specification of the replaced parts, the effectiveness of the maintenance, and whether the equipment still has problems after the maintenance is completed.
In low concentration carbon monoxide gas. It can cause symptoms such as headache, shortness of breath, nausea and vomiting,Wiesbaden10 meter aluminum alloy lifting platform, body weakness and dizziness, psychological confusion, and even brain damage. In severe cases, it can cause death, such as starting the engine of the equipment in the garage.
Method: Check if the hydraulic oil in the mailbox is sufficient; Check if the oil filler cap of the fuel tank is excessively sealed, causing difficulty in oil pump suction. Check if the connection of the oil pump suction pipeline is loose to prevent air from the oil pump; Check whether the motor, cover,WiesbadenElevating herringbone ladder aluminum alloy, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions. Air, check whether the motor, cover, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions.
The application of hydraulic aluminum alloy elevators in our production is already very common and they play an important role in our production, especially in high-altitude operation of goods.
How to use an aluminum alloy elevator: Preparation before use: The level must be adjusted before use, otherwise it cannot be used; The elevator is not allowed to move or adjust its base during operation; Aluminum alloy series rated load capacity includes people and belongings, do not overload; It is not allowed to climb or stand on the guardrail of the manned platform for operation; It should be used on a solid and flat ground, and should never be used on temporary stands, trucks (trucks, trucks, uncovered vehicles), beds, no load is allowed to touch the side to prevent accidents; Support your feet as if they were on the ground, and make a solid cushion and adjust it steadily; During work, no one is allowed to stand under the manned framework; Do not tilt the use of mast type elevators, and when using high walls, the lifting height should not be greater than the height of the high wall; Before placing or erecting the support frame it is necessary to connect the support rod to the hole on the auxiliary pin before placing or erecting it. It is necessary to operate carefully to prevent accidents.
On the friction surface, there should be no dirt present, and any dirt must be washed off with gasoline or thinner.
Safety production.Aluminum alloy elevator is a multifunctional high-altitude work equipment that uses electric hydraulic transmission. It has the advantages of light weight, self walking electric starting, self supporting legs, simple operation, large working surface, and can safely and stably carry out high-altitude work. After using the mobile aluminum alloy elevator for a period of time, it requires overall maintenance. Below is an introduction to the maintenance precautions for the mobile aluminum alloy elevator.
It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas of the aluminum alloy elevator engine contains carbon monoxide. This is a toxic gas that has been in low concentration for a long time
It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas of the aluminum alloy elevator engine contains carbon monoxide. This is a toxic gas that has been in low concentration for a long time
Aluminum alloy elevator is a multifunctional high-altitude work equipment that uses electric hydraulic transmission. It has the advantages of light weight, self walking, electric starting, self supporting legs simple operation, large working surface, and can safely and stably carry out high-altitude work. After using the mobile aluminum alloy elevator for a period of time, it requires overall maintenance. Below is an introduction to the maintenance precautions for the mobile aluminum alloy elevator.
build.It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas of the aluminum alloy elevator engine contains carbon monoxide. This is a toxic gas that has been in low concentration for a long time
The equipment voltage is 24V DC, effectively ensuring personal safety.
Regularly check the connection of each part and tighten it if there is any looseness. The tightness of the body connecting bolts should be checked when the body is under pressure (the rotating arm can be used to cause compression), and all connecting shafts must have split pins and be sufficient. Professional items
Wiesbaden.The cost of aluminum alloy elevators also depends on the cost of the product. Products with different material specifications have different functions, lifespan, and safety performance. When it comes to aluminum alloy elevators, many people only focus on price, the mechanical and electrical systems of the elevator will be overhauled.
The reduction gearbox, gearbox, external meshing gear and other parts, as well as the hydraulic oil, are all carried out according to the requirements in the table. We provide various aluminum alloy elevator manufacturers to individuals and enterprises nationwide for a long time, with on-site settlement and honest operation. We have offices in various regions and can cooperate for a long time