AntibesWarehouse electric elevatorService purposes

Many theaters use a lifting platform as a vertical transportation tool for goods. The rear of the main stage or the end of the side stage in many theaters are equipped with a set container transportation lifting platform, which is used to vertically transport items from the ground to a designated location or even the stage plane. The lifting platform of the music pool is often used for transporting movable seats, but also have an overflow valve to prevent excessive system pressure during upward movement

Antibes.During maintenance or when problems occur, the power supply should be cut off in a timely manner. After lifting, the rotary valve will automatically open. To close the plug valve,AntibesElectric background axis elevator,AntibesElectric lifting scissor lift,AntibesElectric 6-meter elevator, it is necessary to first turn the handle to turn the plug to a 90 degree position until it is closed, and then turn the transmission handwheel to lower the plug and achieve sealing.

.Installation and dismantling personnel and drivers should hold certificates to work.

Double layer steel mesh: The diameter of the steel bars is 12mm, with a spacing of 200mm.

News Abstract: The development of the lifting platform industry will continue to grow in recent years! With the continuous development of electric lifting machinery for high-altitude operations in recent years, the products of electric lifting platform vehicles have been continuously improved, and various new technologies and materials have emerged making the further development of lifting platform vehicles possible.

The bearing capacity of the building structure at the attachment point of the wall bracket should meet the requirements specified in the user manual for construction electric elevators.

Setting requirements: Construction electric elevators should be equipped with up travel (limit) switches.

Setting requirements: The landing door should be standardized and tooled.

Project scope.Secondly, it is necessary to avoid irregular operations. To ensure the normal and orderly operation of the lifting platform and achieve the ideal unloading level the lifting platform is driven by electrical energy and lifted by the hydraulic system. During operation, timely inspection of various functions is essential.

The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.

Especially suitable for steel structured factories, suitable for both indoor and outdoor installation.

To ensure safe and reliable braking of the lifting platform and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure. Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; Program adjustment time delay to avoid frequent movement of electric elevators that may affect their service life.

Executive standard.In addition to ground protective fences, low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between 1m and 2m. And there should be at least protective railings, a half height middle crossbar, and a toe board at least 150mm above the ground.

Electric elevators should be regularly maintained and cleaned. During maintenance and cleaning, the bracket should be supported to prevent the electric elevator from overturning. Electrical and hydraulic systems should be maintained by professional personnel; When the battery level display is less than 40%

Setting requirements: The layout and installation of all cables and wiring of electric elevators should be able to prevent mechanical damage.

Antibes.Construction electric elevators outside the lightning protection range

Setting requirements: The wall bracket should use the manufacturer's matching standard products.

The counterweight guide rail should meet the specification requirements.